File List:
00 0300 745 4.pdf
00 0300 745 4.pdf:
1. Introduction
1.1 General information
1.1.1 Validity of the manual
1.1.2 Information on the instruction manual
1.1.3 Symbols and indications
1.1.4 Qualified specialized workshop
1.1.5 Maintenance instructions
1.1.6 Technical instructions
2 Security
2.1 Recognize warning signs
2.1.1 Danger symbols
2.1.2 Keyword
2.2 Proper application of the machine
2.2.1 Proper machine application
2.2.2 Logically foreseeable misuse
2.3 Safety instructions
2.3.1 Meaning of the instruction manual
2.3.2 Observe graphic danger symbols and alarm indications
2.3.3 Requirements of all people who work with the machine
2.3.4 Optional equipment and spare parts
2.3.5 Correct technical condition
Operation only after correct start-up
Correct technical condition of the machine
Danger due to damage to the machine
2.3.6 Danger from coasting sharpening stone
2.3.7 Maintain functional protection devices
2.3.8 Personal protective equipment
2.3.9 Wear appropriate clothing
2.3.10 Unsuitable consumables
2.3.11 Safe handling of consumables and auxiliary materials
2.3.12 Environmental protection and waste disposal
2.3.13 Electrical shock from electrical equipment
2.3.14 Pressurized air
2.3.15 Maintenance work and repair work
2.4 Safety instructions on the machine
2.4.1 Information on graphic danger symbols
2.4.2 Position of warning symbols
2.5 Safety devices
2.5.1 Protective hood
2.5.2 Blade covers
3 Machine Description
3.1 Summary and operation
3.1.1 Summary AQUA NON STOP COMFORT
3.1.2 AQUA NON STOP COMFORT operating mode
3.2 Identification plates and identification numbers
3.2.1 Explanation of head identification plate
4 Control and display instruments
4.1 Control elements of the blade sharpening device
4.1.1 Control desk
4.1.2 Main switch
4.1.3 Pressure gauge
5 Technical data
5.1 AQUA NON STOP COMFORT
5.1.1 Measurements
5.1.2 Weight
5.1.3 Maximum load
5.1.4 Electrical connections
Washing pump with independent power supply
5.1.5 Compressed air
5.1.6 Acoustic intensity level
5.2 Inputs
5.2.1 Sharpening emulsion
5.2.2 Lubricants
5.2.3 Sharpening stone
6 Preparation of the machine
6.1 Turn off the machine and secure it
6.1.1 Turn off the machine and secure it
6.2 Perform before commissioning
6.2.1 Perform before first start-up
6.2.2 Installing the blade sharpening device
6.2.3 Set the language
6.2.4 Setting the language
7 Management
7.1 Prepare for sharpening
7.1.1 Prepare for sharpening
7.1.2 Connect pressurized air
7.1.3 Connect the power
7.1.4 Change the guide template
7.1.5 Change the support template
7.1.6 Adjust the sharpening path
7.1.7 Adjust the sharpening angle
7.2 Sharpen blades
7.2.1 Sharpening
7.2.2 Place the blades
7.2.3 Close the protective hood
7.2.4 Start sharpening
7.2.5 Adjusting the working area of the sharpening stone
7.2.6 Remove the blades
7.2.7 Check sharpening
8 Incident and solution
8.1 Summary of incidents
8.1.1 Blade sharpening device
8.2 Sharpening device
8.2.1 Adjust the sharpening stone
8.2.2 Change the sharpening stone
8.2.3 Check the switching status of sensors and valves
9 Maintenance
9.1 Maintenance intervals
9.1.1 After the first 50 hours of service
9.1.2 Daily
9.1.3 Weekly
9.1.4 Annually
9.1.5 Every 2 years
9.2 Greasing scheme
9.2.1 Grease the grease points daily
9.3 Sharpening device
9.3.1 Check the sharpening stone
9.3.2 Clean the interior area of the sharpening device
9.3.3 Clean the interior area of the sharpening device
9.3.4 Adjusting the sharpening emulsion nozzle
9.3.5 Check the fill level of the sharpening emulsion
9.3.6 Clean the suction area of the pumps
9.3.7 Empty sharpening emulsion
p 9.3.9 Check the sharpening emulsion
9.3.10 Clean the chip drawer
9.3.11 Remove water from pressurized air
10 Decommissioning and waste disposal
10.1 General information
10.1.1 Decommissioning and waste disposal
11 EC declaration of conformity
11.1 EC declaration of conformity
Claas Operator Manual PDF
Claas Operator Manual PDF
Claas RANGER 928, 925, 920 und PLUS (510) Telehandlers Operator Manual DE
Claas Operator Manual PDF
![](https://automanual.net/wp-content/uploads/2024/04/claas-aqua-non-stop-comfort-x01-miscellaneous-operator-manual-es-1.jpg)