komatsu d155ax 5 bull dozer operation and maintenance manual eeam023402 1

komatsu d155ax 5 bull dozer operation and maintenance manual eeam023402 2

komatsu d155ax 5 bull dozer operation and maintenance manual eeam023402 3

komatsu d155ax 5 bull dozer operation and maintenance manual eeam023402 4

komatsu d155ax 5 bull dozer operation and maintenance manual eeam023402 5

Komatsu D155AX-5 Bull Dozer Operation and Maintenance Manual EEAM023402

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: EEAM023402
Format: PDF
Size: 9.8MB
Number of Pages: 302

Category: Komatsu Operation and Maintenance Manual PDF

Model List:
- D155AX-5 Bull Dozer

1. FOREWORD
1.1. FOREWORD
1.2. SAFETY INFORMATION
1.2.1. Noise emission levels
1.2.2. Vibration levels
1.2.2.1. Guide to Reduce Vibration Levels on Machine
1.3. INTRODUCTION
1.3.1. FRONT/REAR, LEFT/RIGHT DIRECTIONS OF MACHINE
1.3.2. BREAKING IN THE MACHINE
1.4. NECESSARY INFORMATION
1.4.1. PRODUCT IDENTIFICATION NUMBER (PIN), MACHINE SERIAL NO. PLATE
1.4.2. ENGINE SERIAL NO. PLATE AND POSITION (1)
1.4.3. ENGINE SERIAL NO. PLATE AND POSITION (2)
1.4.4. BLADE SERIAL NO. PLATE POSITION
1.4.5. RIPPER SERIAL NO. PLATE POSITION
1.4.6. ROPS, FOPS NO. PLATE POSITION
1.4.7. POSITION OF SERVICE METER
1.4.8. TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
1.4.9. MACHINE SERIAL NUMBER PLATE
1.4.10. ATTACHMENTS, OPTIONS
1.4.11. POSITIONS OF SAFETY PICTOGRAMS
1.4.12. SAFETY LABELS
1.5. GENERAL PRECAUTIONS
1.6. PRECAUTIONS FOR OPERATION
1.6.1. BEFORE STARTING ENGINE
1.6.2. OPERATION
1.6.3. TRANSPORTATION
1.6.4. BATTERY
1.6.5. TOWING
1.7. PRECAUTIONS FOR MAINTENANCE
2. OPERATION
2.1. GENERAL VIEW
2.1.1. GENERAL VIEW OF MACHINE
2.1.2. GENERAL VIEW OF CONTROLS AND GAUGES
2.2. EXPLANATION OF COMPONENTS
2.2.1. FRONT PANEL
2.2.1.1. CHECK MONITOR GROUP
2.2.1.2. CAUTION MONITOR GROUP
2.2.1.3. EMERGENCY CAUTION ITEMS
2.2.1.4. METER GROUP
2.2.1.5. SWITCHES
2.2.1.6. LAMPS
2.2.1.7. METHOD OF USING DISPLAY PANEL B (Multiinformation)
2.2.2. SWITCHES
2.2.3. CONTROL LEVERS, PEDALS
2.2.4. DUST INDICATOR
2.2.5. POWER SOURCE
2.2.6. FUSE BOX
2.2.6.1. CIRCUIT BREAKER
2.2.6.2. CIRCUIT BREAKER FOR MAIN POWER SUPPLY
2.2.6.3. FUSE CAPACITY AND NAME OF CIRCUIT
2.2.7. DOOR POCKET
2.2.8. ASHTRAY
2.2.9. CAR RADIO, HANDLING
2.2.9.1. EXPLANATION OF COMPONENTS
2.2.9.2. METHOD OF USE
2.2.9.3. PRECAUTIONS WHEN USING
2.2.10. CAR STEREO, HANDLING
2.2.10.1. EXPLANATION OF COMPONENTS
2.2.10.2. METHOD OF OPERATION
2.2.10.3. PRECAUTION WHEN USING
2.2.11. AIR CONDITIONER
2.2.11.1. GENERAL LOCATIONS AND FUNCTION OF CONTROL PANEL
2.2.11.2. METHOD OF OPERATION
2.2.11.3. PRECAUTIONS WHEN USING
2.2.11.4. SET SO THAT COLD AIR DOES NOT DIRECTLY BLOW ONTO THE GLASS SURFACE
2.2.11.5. CHECKS DURING OFFSEASON
2.2.11.6. PROCEDURE FOR REPLACING RECEIVER
2.2.11.7. CHECK COMPRESSOR BELT TENSION AND REFRIGERANT (GAS) LEVEL
2.2.11.8. CLEANING AIR FILTER
2.2.11.9. SKILLFUL USE OF AIRCONDITIONER
2.2.12. HEATER, HANDLING
2.2.12.1. METHOD OF OPERATION
2.2.12.2. CLEANING AIR FILTER
2.2.13. ACCUMULATOR, HANDLING
2.2.13.1. METHOD OF RELEASING PRESSURE IN OPERATING CIRCUIT ON MACHINE EQUIPPED WITH ACCUMULATOR
2.3. OPERATION
2.3.1. CHECK BEFORE STARTING ENGINE, ADJUST
2.3.1.1. WALKAROUND CHECK
2.3.1.2. CHECK BEFORE STARTING
2.3.1.3. ADJUSTMENT
2.3.1.4. OPERATIONS AND CHECKS BEFORE STARTING ENGINE
2.3.2. STARTING ENGINE
2.3.2.1. NORMAL STARTING
2.3.2.2. STARTING IN COLD WEATHER
2.3.3. OPERATIONS AND CHECKS AFTER STARTING ENGINE
2.3.3.1. WARMING UP OPERATIONS
2.3.3.2. IN COLD AREAS
2.3.4. STOPPING ENGINE
2.3.5. MOVING MACHINE
2.3.6. STOPPING MACHINE
2.3.7. SHIFTING GEAR
2.3.8. SHIFTING BETWEEN FORWARD AND REVERSE
2.3.9. STEERING MACHINE
2.3.9.1. NORMAL TURNING
2.3.9.2. TURNING WHILE DESCENDING A SLOPE
2.3.10. PRECAUTIONS FOR OPERATION
2.3.10.1. PAY ATTENTION TO GAUGES
2.3.10.2. PERMISSIBLE WATER DEPTH
2.3.10.3. PRECAUTIONS WHEN TRAVELING UP OR DOWN HILLS
2.3.10.4. PRECAUTIONS ON SLOPE
2.3.10.5. METHOD OF USING BRAKES
2.3.10.6. PROHIBITED TO KEEP THE DOOR OPEN DURING OPERATIONS
2.3.10.7. IT IS PROHIBITED TO MODIFY THE CAB GLASS IN ANY WAY THAT WILL OBSTRUCT THE VIEW
2.3.10.8. PRECAUTIONS FOR BLIND SPOTS CAUSED BY CAB STAY AND ROPS STAY
2.3.11. PARKING MACHINE
2.3.12. CHECK AFTER STOPPING ENGINE
2.3.13. CHECK AFTER FINISHING WORK
2.3.14. LOCKING
2.3.15. RIPPER OPERATION
2.3.15.1. EFFECTIVE METHOD OF USE
2.3.15.2. DIGGING UP BOULDERS OR ROCKBED
2.3.15.3. OPERATING ON SLOPES
2.3.15.4. METHOD OF OPERATING PIN PULLER
2.3.16. OPERATING METHOD FOR RIPPING OPERATIONS
2.3.16.1. BASIC OPERATING METHOD
2.3.16.2. RIPPING BY CLIFFS
2.3.16.3. RIPPING BY SLOPE FACES
2.3.16.4. DIGGING UP BOULDERS
2.3.16.5. PRECAUTIONS WHEN RIPPING
2.3.17. WORK POSSIBLE USING BULLDOZER
2.3.17.1. DOZING
2.3.17.2. SMOOTHING
2.3.17.3. CUTTING INTO HARD OR FROZEN GROUND OR DITCHING
2.3.17.4. FELLING TREES, REMOVING STUMPS
2.3.17.5. PUSHER OPERATIONS
2.3.18. ADJUSTING POSTURE OF WORK EQUIPMENT
2.3.18.1. METHOD OF ANGLING BLADE
2.3.18.2. ADJUSTING TILT AMOUNT
2.3.18.3. ADJUSTING RIPPER
2.3.18.4. ADJUST ANGLE OF BLADE EDGE
2.3.19. TIPS FOR LONGER UNDERCARRIAGE LIFE
2.3.19.1. OPERATION METHOD
2.3.19.2. INSPECTION AND ADJUSTING
2.3.19.3. INSPECTION AND REPAIR
2.4. TRANSPORTATION
2.4.1. LOADING, UNLOADING WORK
2.4.2. PRECAUTIONS FOR LOADING
2.4.3. METHOD OF LIFTING MACHINE
2.4.4. PRECAUTIONS FOR TRANSPORTATION
2.4.5. TRAVELING ON ROADS
2.4.6. REMOVAL OF CAB
2.5. COLD WEATHER OPERATION
2.5.1. PRECAUTIONS FOR LOW TEMPERATURE
2.5.1.1. FUEL AND LUBRICANTS
2.5.1.2. COOLANT
2.5.1.3. BATTERY
2.5.2. AFTER COMPLETION OF WORK
2.5.3. AFTER COLD WEATHER
2.6. LONGTERM STORAGE
2.6.1. BEFORE STORAGE
2.6.2. DURING STORAGE
2.6.3. AFTER STORAGE
2.7. TROUBLESHOOTING
2.7.1. AFTER RUNNING OUT OF FUEL
2.7.1.1. PROCEDURE FOR BLEEDING AIR
2.7.2. METHOD OF TOWING MACHINE
2.7.3. IF BATTERY IS DISCHARGED
2.7.3.1. REMOVAL AND INSTALLATION OF BATTERY
2.7.3.2. PRECAUTIONS WHEN CHARGING BATTERY
2.7.3.3. STARTING ENGINE WITH BOOSTER CABLE
2.7.4. OTHER TROUBLE
2.7.4.1. ELECTRICAL SYSTEM
2.7.4.2. MONITOR PANEL
2.7.4.3. CHASSIS
2.7.4.4. ENGINE
3. MAINTENANCE
3.1. GUIDES TO MAINTENANCE
3.2. OUTLINES OF SERVICE
3.2.1. HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
3.2.1.2. FUEL
3.2.1.3. COOLANT AND WATER FOR DILUTION
3.2.1.4. GREASE
3.2.1.5. CARRYING OUT KOWA (Komatsu Oil Wear Analysis)
3.2.1.6. STORING OIL AND FUEL
3.2.1.7. FILTERS
3.2.2. OUTLINE OF ELECTRIC SYSTEM
3.2.3. HANDLING HYDRAULIC RELATED EQUIPMENT
3.3. WEAR PARTS LIST
3.3.1. WEAR PARTS LIST
3.4. RECOMMENDED FUEL, COOLANT, AND LUBRICANT
3.4.1. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
3.4.2. RECOMMENDED BRANDS, RECOMMENDED QUALITY FOR PRODUCTS OTHER THAN KOMATSU GENUINE OIL
3.5. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
3.5.1. TORQUE LIST
3.6. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
3.6.1. SAFETY CRITICAL PARTS
3.7. MAINTENANCE SCHEDULE CHART
3.7.1. MAINTENANCE SCHEDULE CHART
3.7.1.1. INITIAL 250 HOURS SERVICE (ONLY AFTER THE FIRST 250 HOURS)
3.7.1.2. WHEN REQUIRED
3.7.1.3. CHECK BEFORE STARTING
3.7.1.4. EVERY 250 HOURS SERVICE
3.7.1.5. EVERY 500 HOURS SERVICE
3.7.1.6. EVERY 1000 HOURS SERVICE
3.7.1.7. EVERY 2000 HOURS SERVICE
3.7.1.8. EVERY 4000 HOURS SERVICE
3.7.1.9. EVERY 8000 HOURS SERVICE
3.8. SERVICE PROCEDURE
3.8.1. INITIAL 250 HOURS SERVICE (ONLY AFTER THE FIRST 250 HOURS)
3.8.2. WHEN REQUIRED
3.8.3. CHECK BEFORE STARTING
3.8.4. EVERY 250 HOURS SERVICE
3.8.5. EVERY 500 HOURS SERVICE
3.8.6. EVERY 1000 HOURS SERVICE
3.8.7. EVERY 2000 HOURS SERVICE
3.8.8. EVERY 4000 HOURS SERVICE
3.8.9. EVERY 8000 HOURS SERVICE
4. SPECIFICATIONS
4.1. SPECIFICATIONS
5. ATTACHMENTS, OPTIONS
5.1. GENERAL PRECAUTIONS
5.1.1. PRECAUTIONS RELATED TO SAFETY
5.2. INTRODUCTION OF ATTACHMENTS AND OPTIONS
5.2.1. INTRODUCTION OF ATTACHMENTS AND OPTIONS
5.3. HEADREST, HANDLING
5.4. CAP WITH LOCK, HANDLING
5.4.1. METHOD OF OPENING AND CLOSING CAP WITH LOCK
5.5. PROCEDURE FOR SELECTING RIPPER POINT
5.5.1. PROCEDURE FOR SELECTING RIPPER POINT

Rate this product