komatsu d65e 12 d65p 12 bull dozer operation and maintenance manual seam007104 1

komatsu d65e 12 d65p 12 bull dozer operation and maintenance manual seam007104 2

komatsu d65e 12 d65p 12 bull dozer operation and maintenance manual seam007104 3

komatsu d65e 12 d65p 12 bull dozer operation and maintenance manual seam007104 4

komatsu d65e 12 d65p 12 bull dozer operation and maintenance manual seam007104 5

Komatsu D65E-12, D65P-12 Bull Dozer Operation and Maintenance Manual SEAM007104

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: SEAM007104
Format: PDF
Size: 12.6MB
Number of Pages: 229

Category: Komatsu Operation and Maintenance Manual PDF

Model List:
- D65E-12 Bull Dozer
- D65P-12 Bull Dozer

1. MAIN MENU
2. COVER
3. FORWARD
4. SAFETY INFORMATION
5. INTRODUCTION
6. LOCATION OF PLATES, TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
7. CONTENTS
8. SAFETY
8.1. GENERAL PRECAUTIONS
8.2. PRECAUTIONS DURING OPERATION
8.2.1. BEFORE STARTING ENGINE
8.2.2. AFTER STARTING ENGINE
8.2.3. TRANSPORTATION
8.2.4. BATTERY
8.2.5. TOWING
8.3. PRECAUTIONS FOR MAINTENANCE
8.3.1. BEFORE CARRYING OUT MAINTENANCE
8.3.2. DURING MAINTENANCE
8.4. POSITION FOR ATTACHING SAFETY LABELS
8.4.1. POSITION FOR ATTACHING SAFETY LABELS
9. OPERATION
9.1. GENERAL VIEW
9.1.1. GENERAL VIEW OF MACHINE
9.1.2. GENERAL VIEW OF CONTROLS AND GAUGES
9.2. EXPLANATION OF COMPONENTS
9.2.1. FRONT PANEL (METERS, LAMPS, SWITCHES)
9.2.2. SWITCHES
9.2.3. CONTROL LEVERS, PEDALS
9.2.4. FUSE BOX
9.2.5. POWER PICKUP CONNECTORS
9.2.6. GREASE PUMP HOLDER
9.2.7. SHOVEL HOLDER
9.2.8. DOOROPEN LOCK (MACHINES EQUIPPED WITH CAB)
9.2.9. SASH GLASS INTERMEDIATE LOCK (MACHINES EQUIPPED WITH CAB)
9.2.10. CAP WITH LOCK (VANDALISM PROOF MACHINES)
9.2.11. HOT AND COOL BOX (MACHINES EQUIPPED WITH CAB)
9.2.12. DOOR POCKET (MACHINES EQUIPPED WITH CAB)
9.2.13. ASHTRAY (MACHINES EQUIPPED WITH CAB)
9.2.14. TOOL BOX
9.2.15. USING CAR RADIO (MACHINES EQUIPPED WITH CAB, CAB RADIO)
9.2.16. HANDLING AIR CONDITIONER (MACHINES EQUIPPED WITH CAB)
9.2.17. HANDLING HEATER (MACHINES EQUIPPED WITH CAB)
9.3. OPERATION
9.3.1. CHECK BEFORE STARTING ENGINE
9.3.2. STARTING ENGINE
9.3.3. OPERATIONS AND CHECKS AFTER STARTING ENGINE
9.3.4. MOVING MACHINE
9.3.5. SHIFTING GEAR
9.3.6. SHIFTING BETWEEN FORWARD AND REVERSE
9.3.7. STEERING MACHINE
9.3.8. STOPPING MACHINE
9.3.9. PRECAUTIONS FOR OPERATION
9.3.10. PARKING MACHINE
9.3.11. CHECK AFTER FINISHING WORK
9.3.12. STOPPING ENGINE
9.3.13. CHECK AFTER STOPPING ENGINE
9.3.14. LOCKING
9.3.15. WORK POSSIBLE USING BULLDOZER
9.3.16. ADJUSTING POSTURE OF WORK EQUIPMENT
9.3.17. TIPS FOR LONGER UNDERCARRIAGE LIFE
9.4. TRANSPORTATION
9.4.1. LOADING, UNLOADING WORK
9.4.2. PRECAUTIONS FOR LOADING AND SECURING THE MACHINE
9.4.3. PRECAUTIONS FOR TRANSPORTATION
9.4.4. PRECAUTIONS WHEN REMOVING WORK EQUIPMENT
9.4.5. REMOVING CAB (MACHINES EQUIPPED WITH CAB)
9.4.6. LIFTING THE MACHINE
9.5. COLD WEATHER OPERATION
9.5.1. PRECAUTIONS FOR LOW TEMPERATURE
9.5.2. AFTER COMPLETION OF WORK
9.5.3. AFTER COLD WEATHER
9.6. LONGTERM STORAGE
9.6.1. BEFORE STORAGE
9.6.2. DURING STORAGE
9.6.3. AFTER STORAGE
9.7. TROUBLESHOOTING
9.7.1. AFTER RUNNING OUT OF FUEL
9.7.2. IF BATTERY IS DISCHARGED
9.7.3. OTHER TROUBLE
10. MAINTENANCE
10.1. GUIDES TO MAINTENANCE
10.2. OUTLINES OF SERVICE
10.2.1. OUTLINE OF OIL, FUEL, COOLANT
10.2.2. RELATING TO ELECTRIC SYSTEM
10.3. WEAR PARTS LIST
10.4. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
10.5. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
10.5.1. INTRODUCTION OF NECESSARY TOOLS
10.5.2. TORQUE LIST
10.6. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
10.7. MAINTENANCE SCHEDULE CHART
10.8. SERVICE PROCEDURE
10.8.1. WHEN REQUIRED
10.8.1.1. CLEAN INSIDE OF COOLING SYSTEM
10.8.1.2. CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT
10.8.1.3. CHECK TRACK TENSION
10.8.1.4. CHECK AND TIGHTEN TRACK SHOE BOLTS
10.8.1.5. CHECK ELECTRICAL INTAKE AIR HEATER
10.8.1.6. REVERSE AND REPLACE THE END BITS AND CUTTING EDGES
10.8.1.7. CLEAN, CHECK RADIATOR FINS
10.8.1.8. ADJUST IDLER CLEARANCE
10.8.1.9. ADJUSTING TENSION OF CENTER BRACE (POWER TILT, POWER PITCH DOZER ONLY)
10.8.1.10. CLEAN AIR CONDITIONER AIR FILTER (FRESH/RECIRC FILTER) (MACHINES EQUIPPED WITH CAB)
10.8.1.11. CHECK, ADJUST AIR CONDITIONER (MACHINES EQUIPPED WITH CAB)
10.8.1.12. GREASE DOOR HINGE (MACHINES EQUIPPED WITH CAB)
10.8.1.13. CHECK DOOR LOCK STRIKER (MACHINES EQUIPPED WITH CAB)
10.8.1.14. REPLACE DOOR DAMPER (MACHINES EQUIPPED WITH CAB)
10.8.1.15. CHECK WINDOW WASHER FLUID LEVEL, ADD FLUID (MACHINES EQUIPPED WITH CAB)
10.8.1.16. BLEED AIR FROM HEAD END OF RIGHT PITCH CYLINDER (POWER TILT, POWER PITCH DOZER ONLY)
10.8.1.17. REPLACE WIPER BLADE (MACHINES EQUIPPED WITH CAB)
10.8.1.18. CHECK IDLER OIL LEVEL, ADD OIL
10.8.1.19. CHECK OIL LEVEL IN DAMPER CASE, ADD AND CHANGE OIL
10.8.2. CHECK BEFORE STARTING
10.8.2.1. CHECK COOLANT LEVEL, ADD WATER
10.8.2.2. CHECKING WITH MACHINE MONITOR (MONITOR PANEL SPECIFICATION)
10.8.2.3. CHECK FUEL LEVEL, ADD FUEL (MONITOR PANEL SPECIFICATION)
10.8.2.4. CHECK FUEL LEVEL, ADD FUEL (GAUGE PANEL SPECIFICATION)
10.8.2.5. CHECK OIL LEVEL IN ENGINE OIL PAN, ADD OIL
10.8.2.6. CHECK OIL LEVEL IN POWER TRAIN CASE, ADD OIL
10.8.2.7. CHECK BRAKE PEDAL TRAVEL
10.8.2.8. CHECK DUST INDICATOR
10.8.2.9. CHECK THAT LAMPS LIGHT UP
10.8.2.10. CHECK HORN SOUND
10.8.2.11. CHECK BACKUP ALARM SOUND (OPTION)
10.8.2.12. CHECK SEAT BELT FOR WEAR OR DAMAGE (OPTION)
10.8.2.13. CHECK FOR WATER AND SEDIMENT IN WATER SEPARATOR, DRAIN WATER
10.8.3. EVERY 50 HOURS SERVICE
10.8.3.1. DRAIN WATER, SEDIMENT FROM FUEL TANK
10.8.4. EVERY 250 HOURS SERVICE
10.8.4.1. LUBRICATING
10.8.4.1.1. (POWER TILT DOZER)
10.8.4.1.2. (POWER TILTPOWER PITCH DOZER)
10.8.4.1.3. ANGLEDOZER
10.8.4.1.4. GREASE EQUALIZER BAR SIDE PIN (4 PLACES)
10.8.4.1.5. GREASE EQUALIZER BAR CENTER PIN (1 PLACE)
10.8.4.1.6. CHECK OIL LEVEL IN FINAL DRIVE CASE, ADD OIL
10.8.4.1.7. CHECK OIL LEVEL IN HYDRAULIC TANK, ADD OIL
10.8.4.1.8. CHECK LEVEL OF BATTERY ELECTROLYTE
10.8.4.1.9. CHECK FAN BELT TENSION, ADJUST
10.8.4.1.10. DRAIN WATER AND SEDIMENT FROM FUEL FILTER
10.8.4.1.11. CHECK, CLEAN ADDITIONAL FUEL STRAINER
10.8.4.1.12. REPLACE POWER TRAIN OIL FILTER ELEMENT
10.8.4.1.13. CHECK BRAKE PERFORMANCE
10.8.5. EVERY 500 HOURS SERVICE
10.8.5.1. REPLACE FUEL FILTER CARTRIDGE
10.8.5.2. CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE
10.8.6. EVERY 1000 HOURS SERVICE
10.8.6.1. CHANGE OIL IN POWER TRAIN CASE, CLEAN STRAINERS (POWER TRAIN STRAINER, SCAVENGING PUMP STRAINER)
10.8.6.2. CHANGE OIL IN FINAL DRIVE CASE (TRANSMISSION)
10.8.6.3. CLEAN BREATHER (1 PLACE)
10.8.6.4. GREASE UNIVERSAL JOINT (2 PLACES)
10.8.6.5. REPLACE CORROSION RESISTOR CARTRIDGE (D65P ONLY)
10.8.6.6. CHECK ALL TIGHTENING PARTS OF TURBOCHARGER (D65P ONLY)
10.8.6.7. CHECK PLAY OF TURBOCHARGER ROTOR (D65P ONLY)
10.8.6.8. CHECK FOR LOOSE ROPS MOUNT BOLTS
10.8.7. EVERY 2000 HOURS SERVICE
10.8.7.1. CHANGE OIL IN HYDRAULIC TANK, REPLACE HYDRAULIC OIL FILTER ELEMENT
10.8.7.2. CLEAN, CHECK TURBOCHARGER (D65P ONLY)
10.8.7.3. CLEAN ENGINE BREATHER ELEMENT
10.8.7.4. CHECK VIBRATION DAMPER
10.8.7.5. CHECK ALTERNATOR, STARTING MOTOR
10.8.7.6. CHECK ENGINE VALVE CLEARANCE, ADJUST
10.8.8. EVERY 4000 HOURS SERVICE
10.8.8.1. CHECK WATER PUMP
11. SPECIFICATIONS
11.1. SPECIFICATIONS
12. OPTIONS, ATTACHMENTS
12.1. GENERAL PRECAUTIONS
12.1.1. PRECAUTIONS RELATED TO SAFETY
12.2. USING SEAT BELT
12.2.1. FASTEN THE BELT AND REMOVE IT IN THE FOLLOWING MANNER
12.2.2. ADJUST THE BELT LENGTH IN THE FOLLOWING MANNER
12.3. HANDLING DELUXE SEAT
12.4. HANDLING ACCUMULATOR
12.4.1. METHOD OF RELEASING PRESSURE IN OPERATING CIRCUIT ON MACHINE EQUIPPED WITH ACCUMULATOR
12.5. EQUIPPING THE FIRE EXTINGUISHER AND THE FIRSTAID KIT

Rate this product