Claas DIRECT DISC 520 (426) Forage Harvesters Operator Manual DE

File List:

– 00 0292 184 1.pdf
– 00 0294 016 2.pdf
– 00 0294 164 3.pdf
– 00 0299 287 4.pdf
– 00 0302 234 3.pdf

00 0292 184 1.pdf

Table of Content:
1 DIRECT DISC 610 (UTyp 0310)DIRECT DISC 520 (UTyp 0515)
2 Table of Contents
3 1 Introduction
3.1 1.1 Notes on the instructions
3.2 1.2 Intended use
4 2 Security
4.1 2.1 Recognize warnings
4.2 2.2 Safety instructions
4.3 2.3 Safety marking
5 3 Machine description
5.1 3.1 Overview and functionality
5.2 3.2 Optional equipment
5.3 3.3 Type plates and identification numbers
5.4 3.4 Information on the machine
6 4 Control and display elements
6.1 4.1 Mounting frame
7 5 Technical data
7.1 5.1 DIRECT DISC 610
7.2 5.2 DIRECT DISC 520
8 6 Prepare machine
8.1 6.1 Switch off and secure the machine
8.2 6.2 Entering workplaces and m.7 Dismantle the attachment
8.8 6.8 Prepare for road travel
8.9 6.9 Prepare work assignment
8.10 6.10 Load attachment
9 7 Operation
9.1 7.1 Driving on the road
9.2 7.2 Settings for work deployment
9.3 7.3 Work input
10 8 Malfunction and remedy
10.1 8.1 Overview of faults
10.2 8.2 Electrics and electronics
11 9 Maintenance
11.1 9.1 Overview of maintenance intervals
11.2 9.2 Gearbox
11.3 9.3 Coupling
11.4 9.4 Drive shaft
11.5 9.5 Drives
11.6 9.6 Hydraulics
11.7 9.7 Mowing device
11.8 9.8 Attachments and machine housings
11.9 9.9 Lubrication plan
12 10 Decommissioning and disposal
12.1 10.1 General information
13 11 EC declaration of conformity
13.1 11.1 DIRECT DISC 610
13.2 11.2 DIRECT DISC 520
14 12 technical terms and abbreviations
14.1 12.1 Terms and explanations

00 0294 016 2.pdf

Table of Content:
1 1 Introduction
1.1 Introduction
2 2 Content
3 3 Foreword
3.1 Particular attention should be paid to
3.2 Nameplate
3.3 Road transport
4 4 For safety
4.1 Intended use
4.2 Reasonably foreseeable misuse
4.3 Labeling of warning and danger notices
4.4 General safety and accident prevention regulations
4.5 Decommissioning and disposal
4.6 Safety sticker with warning symbols
4.7 Safety support
5 5 Technical data
5.1 DIRECT DISC 610
5.2 DIRECT DISC 520 Comfort
6 6 Assembly
6.1 Unloading/loading the attachment
6.2 Installing the attachment for the first time
6.3 Attachment
6.4 Using the attachment
6.5 Adjustments to the attachment
6.6 Adjustments to the forage harvester
7 7 Before commissioning
7.1 Check and observe before commissioning
7.2 Install attachment
7.3 Working and transport position
7.4 Dismantling/putting down the attachment
8 8 Operation
8.1 Deployment
8.2 Additional equipment
9 9 Maintenance
9.1 Important maintenance instructions
9.2 Drives
9.3 Mower bar
9.4 Couplings
9.5 Chains
9.6 V-belt
9.7 Spring adjustment
9.8 Drive shafts
9.9 Mounting lever
9.10 Mower blades
9.11 Mower discs
9.12 Conveyor drums
9.13 Electrics
9.14 Hydraulics
9.15 Wrap protection
9.16 Fairing
9.17 Locking
9.18 Screw connections
9.19 Fasteners
9.20 Cleaning and care
9.21 Wintering
9.22 Lubricant table
9.23 Faults
10 10 Lubrication plan
10.1 For safety
10.2 Lubricants
10.3 Lubrication

00 0294 164 3.pdf

Table of Content:
1 transport trolley DIRECT DISC
2 Table of Contents
3 Introduction
3.1 Notes on the instructions
3.2 Intended use
4 Security
4.1 Recognize warnings
4.2 Safety instructions
4.3 Safety marking
5 Machine description
5.1 Overview and functionality
5.2 Type plates and identification numbers
5.3 Information on the machine
6 operating and display elements
6.1 Controls
7 Technical data
7.1 Transport trolley
7.2 Operating materials
8 Prepare machine
8.1 Uncouple and secure the transport trolley
8.2 Assembling the transport trolley
8.3 Adjust transport trolley
8.4 Attach transport trolley
8.5 Unhook the transport trolley
8.6 Loading the transport trolley
9 Operation
9.1 Driving on the road
9.2 Loading the transport trolley
9.3 Unload transport trolley
10 Malfunction and remedy
10.1 Overview of faults
10.2 Chassis
11 Maintenance
11.1 Overview of maintenance intervals
11.2 Chassis
11.3 Brake
11.4 Electrics and electronics
11.5 Frame
11.6 Attachments and machine housing
11.7 Lubrication plan
12 Decommissioning and disposal
12.1 General information
13 EC Declaration of Conformity
13.1 Transport trolley
14 technical terms and abbreviations
14.1 Terms and explanations

00 0299 287 4.pdf

Table of Content:
1 1 Introduction
1.1 Introduction
2 2 Content
3 3 Foreword
3.1 Particular attention should be paid to
3.2 Nameplate
3.3 Road transport
4 4 For safety
4.1 Intended use
4.2 Reasonably foreseeable misuse
4.3 Labeling of warning and danger notices
4.4 General safety and accident prevention regulations
4.5 Decommissioning and disposal
4.6 Safety sticker with warning symbols
4.7 Safety support
5 5 Technical data
5.1 DIRECT DISC 520 Contour / 520
7 7 Before commissioning
7.1 Check and observe before commissioning
7.2 Install attachment
7.3 Working and transport position
7.4 Dismantling/putting down the attachment
8 8 Operation
8.1 Deployment
8.2 Additional equipment
9 9 Maintenance
9.1 Important maintenance instructions
9.2 Drives
9.3 Chains
9.4 V-belt
9.5 Spring adjustment
9.6 Drive shafts
9.7 Mower bar
9.8 Mower blades
9.9 Mower discs
9.10 Electrics
9.11 Hydraulics
9.12 Fairing
9.13 Locking
9.14 Screw connections
9.15 Fasteners
9.16 Cleaning and care
9.17 Wintering
9.18 Malfunctions
10 10 Lubrication plan
10.1 For safety
10.2 Lubricants
10.3 Lubrication

00 0302 234 3.pdf

Table of Content:
1 JAGUAR 990 /980 / 970 / 960 / 950 / 940 / 930JAGUAR 880 / 870 / 860 / 850 / 840 / 830JAGUAR 990 / 960 TERRA TRAC
2 Table of Contents
3 1 Introduction
3.1 1.1 General information
3.2 1.2 Type plates and identification numbers
4 2 Security
4.1 2.1 Recognize warnings
4.2 2.2 Safety instructions
4.3 2.3 Safety marking
5 3 Control and display elements
5.1 3.1 Cab and driver’s cab
6 4 Technical data
6.1 4.1 Adapter
7 5 Operation
7.1 5.1 Adapter
8 6 Maintenance
8.1 6.1 Overview of maintenance intervals
8.2 6.2 Lubrication plan
8.3 6.3 Gearbox, clutch and cardan shaft