Claas Gps Pilot Cebis Mobile (B83) Digital Solutions Operator Manual EN

File List:

00 0018 584 4.pdf
00 0018 647 2.pdf
00 0018 652 1.pdf
00 0019 424 0.pdf
00 0291 153 2.pdf
00 0301 051 0.pdf
00 0303 482 0.pdf
00 1400 240 0.pdf
00 1400 243 0.pdf
00 1400 244 0.pdf
00 1400 638 3.pdf
00 1402 805 1.pdf
00 2348 427 0.pdf

00 0018 584 4.pdf:

EASY on board app
Table of contents
1 Introduction
1.1 Notes on the manual
1.1.1 Information about this Operator’s Manual
1.1.2 Symbols and notes
1.1.3 Notes regarding warranty
1.1.4 Technical requirements
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
1.3 Softwareupdate
1.3.1 Installing updates
1.3.2 Updating the operating system
1.4 Faults and remedies
1.4.1 fault table
1.4.2 Fault message: Screen locked
1.5 Technical terms and abbreviations
1.5.1 Technical terms
1.5.2 Units
1.5.3 Abbreviations
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 Meaning of Operator’s Manual
2.2.2 Requirements made on all persons working with the product
2.2.3 Hazard areas
2.2.4 Check interactions with self-propelled machines / tractors and implements
2.2.5 Structural changes
2.2.6 Optional equipment and spare parts
2.2.7 Technical status
2.2.8 Hazard caused by damage to the product
2.2.9 Visibility of work area
2.2.10 Glare and reflections
2.2.11 Unintentional triggering of functions
2.2.12 Hazards caused by signal tones
2.2.13 Unauthorised use
2.2.14 Use of mobile terminal outside the cab
2.2.15 Follow the safety instructions
2.2.16 Respecting technical limit values
2.2.17 Preparing the product for road travel
2.2.18 Hazards when driving on the road and on the field
2.2.19 Hazards when driving on the road with an ISOBUS implement
2.2.20 Hazards caused by switching off the app while driving
2.2.21 Hazards from disturbance of WLAN environment
2.2.22 Hazards from covering up the App
2.2.23 Hazards caused by malfunctions of the app
2.2.24 Lifted machine parts and loads
3 EASY on board App
3.1 Operating and display elements
3.1.1 Overview of the EASY on board App
3.1.2 Overview of function bar
3.1.3 Cockpit bar overview
3.1.4 Functions of the EASY on board App
3.1.5 Using the number pad
3.1.6 Using the keyboard
3.2 Operation
3.2.1 Selecting a module
3.2.2 Activating or deactivating modules
3.2.3 Activating or changing the licence
3.2.4 Setting the volume
3.2.5 Closing the app
4 Documentation
4.1 Product description
4.1.1 Requirements
4.1.2 Task data
4.1.3 Product options
4.1.4 App operation in the background
4.2 Operating and display elements
4.2.1 module
4.2.2 Tasks
4.2.3 Fields
4.2.4 Harvesting
4.2.5 Seeds
4.2.6 Consumables
4.2.7 Machines and implements
4.2.8 Persons
4.2.9 Remark
4.2.10 module functions
4.2.11 Entering quantities
4.3 Creating a task
4.3.1 Creating a task
4.3.2 Copying a task
4.3.3 Selecting fields
4.3.4 Creating a new field
4.3.5 Selecting the harvest type
4.3.6 Selecting seeds
4.3.7 Select consumables
4.3.8 Selecting machines and implements
4.3.9 Selecting persons
4.3.10 Save task
4.4 Documentation
4.4.1 Starting the task
4.4.2 Stopping the task
4.4.3 Completing the task
4.4.4 Synchronising an task
4.4.5 Exporting data
4.4.6 Deleting settings
5 ISO terminal
5.1 Product description
5.1.1 module
5.1.2 Connecting the ISO terminal
5.2 Operating and display elements
5.2.1 Overview of the ISO terminal
5.2.2 module functions
5.2.3 Controlling the machine without a USB connection to the CWI
5.3 Programmable keys
5.3.1 Assigning a key assignment
5.3.2 Programming the key assignment
5.3.3 Editing a key assignment
5.3.4 Deleting key assignments
6 Adjustments
6.1 Operating and display elements
6.1.1 Settings
6.2 Adjustments
6.2.1 Resetting the data source
6.2.2 Activating ISOBUS communication
6.2.3 Checking the synchronisation status
6.2.4 Sending an error report
7.1 Adjustments
7.1.1 Where do I find the version number?
7.1.2 Can I change to another app while this app is running?

00 0291 153 2.pdf:

CEBIS MOBILE
Table of contents
1 To this operator’s manual
1.1 Notes on the manual
1.1.1 General instructions
1.1.2 Validity of manual
1.1.3 Handling of manual
1.1.4 Symbols and notes
1.1.5 Equipment
1.1.6 Specifications
1.1.7 Licensing for road traffic
2.1 Safety rules
2.1.1 Particularly important
2.1.2 Intended use
2.1.3 Reasonably foreseeable misuse
2.1.4 Accumulator
3 Product description
3.1 Overview and method of operation
3.1.1 GPS PILOT overview
3.1.2 Overview of CEBIS MOBILE terminal
3.1.3 Overview of correction signals
OMNISTAR HP / XP
BASELINE HD
3.1.4 Overview of antennas
CLAAS Communication module (CCM)
3.1.5 Overview of BASELINE HD base stations
3.1.6 Overview of RTK base station
3.2 Optional equipment
3.2.1 Reference line management
3.3 Identification plates and identification number
3.3.1 Spare parts and technical questions
3.3.2 CEBIS MOBILE identification plate position
3.3.3 CEBIS MOBILE identification plate explanation
4 Operating and control elements
4.1 CEBIS MOBILE onboard computer
4.1.1 CEBIS MOBILE on-board computer
4.1.2 Controls and displays
4.2 Antenna
4.2.1 CLAAS COMMUNICATION module status display
4.3 GPS PILOT application
4.3.1 Controls and displays
4.3.2 Main menu
4.3.3 Status indicator
4.4 Reference line management application
4.4.1 Menu structure
5 Preparing the product
5.1 Prior to operation
5.1.1 Preparing initial operation
5.1.2 Preparing field data
5.2 Correction system
5.2.1 General instructions
5.2.2 Concluding a licence contract
5.2.3 Having the GPS receiver enabled
5.2.4 Setting up the base station
5.2.5 Switching on the base station
5.2.6 Applying for a radio licence
5.2.7 Entering the base station transmit frequency
5.2.8 Having the radio equipment set
5.2.9 Concluding a licence contract
6 Operation
6.1 Check list
6.1.1 Preparing field use
6.1.2 Starting field use
6.1.3 Preparing road travel
6.2 CEBIS MOBILE onboard computer
6.2.1 Inserting the memory card
6.2.2 Switching on the CEBIS MOBILE terminal
6.2.3 Starting the application
6.2.4 Activating the application
6.2.5 Calling up the menu
6.2.6 Switching off the CEBIS MOBILE terminal
6.3 GPS PILOT application
6.3.1 Activating job management
6.3.2 Selecting field data
6.3.3 Folding the RTK radio antenna*
6.3.4 Activating GPS PILOT
6.3.5 Switching off GPS PILOT
6.4 GPS PILOT main menu
6.4.1 GPS settings menu
6.4.2 Machine settings menu
6.4.3 System settings menu
6.4.4 Field management menu
6.4.5 Calibration menu
6.4.6 Diagnosis menu
6.4.7 Setting sensitivity
6.4.8 Setting the GPS receiver
6.4.9 Setting the machine type
6.4.10 Making implement settings
Implement width and overlap
Implement offset (lateral)
6.4.11 Setting hitch point longitudinal axis offset
Measuring the longitudinal axis offset of the hitch point
6.4.12 Making system settings
6.4.13 Managing a field
Creating a field
Deleting the area covered
6.4.14 Calibrating the lateral angle
6.4.15 Calibrating straight-ahead travel
6.5 Track recording
6.5.1 Drive mode menu
6.5.2 Select drive mode
6.5.3 Recording an AB straight line track
6.5.4 Recording track A and direction
6.5.5 Driving in a fleet
6.5.6 Recording the AB contour track
6.5.7 Setting contour track recording
6.5.8 Recording the contour track
6.6 Guidance lines
6.6.1 Reference line management menu
6.6.2 Selecting a reference line
6.6.3 Relocating guidance lines
6.7 Points of return
6.7.1 Points of return menu
6.7.2 Setting a point of return
6.7.3 Editing points of return
Activating / deactivating / deleting a point of return
Replacing a point of return
7 Faults and remedies
7.1 General Information
7.1.1 General warning information
7.2 Faults and solutions
7.2.1 System start
7.2.2 GPS signal
7.2.3 EGNOS correction signal
7.2.4 e-Dif correction signal
7.2.5 BASELINE HD correction signal
7.2.6 OMNISTAR HP / XP correction signal
7.2.7 RTK correction signal
7.2.8 RTK NET correction signal
7.2.9 Activating the AUTOPILOT
7.2.10 Deactivating the AUTOPILOT
7.2.11 Recording reference lines
7.2.12 Field data job management fault
7.2.13 Reference line management
7.2.14 Track guidance
8 Maintenance
8.1 General maintenance Information
8.1.1 Cleaning
8.2 Maintenance schedules
8.2.1 Daily
8.2.2 As required
8.3 BASELINE HD
8.3.1 Checking the charge condition of the battery
8.3.2 Charging the battery
8.3.3 Supplying the base station with an external battery
8.3.4 Remove / install battery of base station
9 Placing out of operation and disposal
9.1 General Information
9.1.1 Putting out of operation and disposal
10 EC-declaration of conformity
10.1 GPS PILOT
10.1.1 EC Declaration of Conformity
11 Technical terms and abbreviations
11.1 Abbreviations
11.1.1 Units
11.1.2 Abbreviations

00 0301 051 0.pdf:

PROFI CAM 3
Table of contents
1 Introduction
1.1 Notes on the manual
1.1.1 Validity of manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Maintenance information
1.1.7 Warranty notes
1.1.8 Spare parts and technical questions
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 Meaning of Operator’s Manual
2.2.2 Observing safety decals and warnings
2.2.3 Optional equipment and spare parts
3 Product description
3.1 Overview and method of operation
3.1.1 How the PROFI CAM works
3.2 Identification plates and identification number
3.2.1 Position of identification plates
3.2.2 Explanation of PROFI CAM identification plate
3.3 Information on the product
3.3.1 CE marking
4 Operating and control elements
4.1 Camera system
4.1.1 Camera system monitor
4.2 Menu structure
4.2.1 Main menu
4.2.2 menu
4.2.3 menu
4.2.4 menu
4.2.5 menu
4.2.6 menu
5 Technical specifications
5.1 PROFI CAM
5.1.1 Monitor
5.1.2 Camera
5.1.3 Switch box
5.1.4 Degree of protection against foreign bodies and water
6 Preparing the product
6.1 Shutting down and securing the machine
6.1.1 Switching off and securing the machine
6.2 Prior to operation
6.2.1 Carry out prior to operation
6.2.2 Installing the sun protection
6.2.3 Aligning the camera
6.2.4 Connecting the camera electrics
7 Operation
7.1 Monitor
7.1.1 Switching on the monitor
7.1.2 Calling up the menu
7.1.3 Setting a menu item
7.1.4 Setting the image orientation
7.1.5 Setting automatic screen darkening
7.1.6 Image mirroring
7.1.7 Setting the trigger view
7.1.8 Setting the follow-up time for trigger view
7.1.9 Setting the display mode
7.1.10 Activating/deactivating a display mode
8 Faults and remedies
8.1 Electrical and electronic system
8.1.1 Overview of problems on PROFI CAM camera system
8.1.2 Replacing the switch box fuse
9 Maintenance
9.1 Maintenance intervals
9.1.1 Every 10 operating hours or daily
9.2 Camera system
9.2.1 Checking the camera system for dirt
9.2.2 Cleaning the camera
9.2.3 Cleaning the switch box
9.2.4 Cleaning the monitor
10 Placing out of operation and disposal
10.1 General Information
10.1.1 Putting out of operation and disposal
11 Technical terms and abbreviations
11.1 Abbreviations
11.1.1 Units
11.1.2 Abbreviations
11.1.3 Technical terms

00 0303 482 0.pdf:

PROFI CAM 4
Table of contents
1 Introduction
1.1 Notes on the manual
1.1.1 Validity of manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Maintenance information
1.1.7 Notes on warranty
1.1.8 Spare parts and technical questions
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 Meaning of Operator’s Manual
2.2.2 Structural changes
2.2.3 Optional equipment and spare parts
2.2.4 Operation only following proper putting into operation
2.2.5 Technical status
2.2.6 Respecting technical limit values
Respecting technical limit values
2.2.7 Hazards when driving on roads and fields
3 Product description
3.1 Overview and method of operation
3.1.1 How the PROFI CAM works
3.2 Identification plates and identification number
3.2.1 Identification plates
3.3 Information on the product
3.3.1 CE marking
4 Operating and display elements
4.1 Camera system
4.1.1 Camera system monitor
4.1.2 CEBIS
4.2 Menu structure
4.2.1 Main menu
4.2.2 menu
4.2.3 menu
4.2.4 menu
4.2.5 menu
4.2.6 menu
5 Technical specifications
5.1 PROFI CAM
5.1.1 Monitor
5.1.2 Camera
5.1.3 Switch box
6 Preparing the product
6.1 Switching off and securing the machine
6.1.1 Switching off and securing the machine
6.2 Prior to putting into operation
6.2.1 Carry out prior to operation
6.2.2 Installing the sun protection
6.2.3 Aligning the camera
7 Operation
7.1 Monitor
7.1.1 Switching on the monitor
7.1.2 Calling up the menu
7.1.3 Setting a menu item
7.1.4 Setting the image orientation
7.1.5 Setting automatic screen darkening
7.1.6 Image mirroring
7.1.7 Setting the trigger view
7.1.8 Setting the follow-up time for trigger view
7.1.9 Setting the display mode
7.1.10 Activating/deactivating a display mode
8 Faults and remedies
8.1 Electric and electronic system
8.1.1 Overview of problems on PROFI CAM camera system
9 Maintenance
9.1 Maintenance intervals
9.1.1 Every 10 operating hours or daily
9.2 Camera system
9.2.1 Checking the camera system for dirt
9.2.2 Cleaning the camera
9.2.3 Cleaning the switch box
9.2.4 Cleaning the monitor
10 Putting out of operation and disposal
10.1 General information
10.1.1 Putting out of operation and disposal
11 Technical terms and abbreviations
11.1 Abbreviations
11.1.1 Units
11.1.2 Abbreviations
11.1.3 Technical terms

00 1400 240 0.pdf:

Table of contents
1 To this operator’s manual
1.1 Notes on the manual
1.1.1 General instructions
1.1.2 Validity of manual
1.1.3 Handling of manual
1.1.4 Symbols and notes
1.1.5 Equipment
1.1.6 Technical specifications
2.1 Safety rules
2.1.1 Particularly important
2.1.2 Qualification of drivers and maintenance personnel
2.1.3 Intended use
2.1.4 General safety and accident prevention regulations
2.1.5 Hydraulic accumulators
2.1.6 First aid measures
2.1.7 Danger of injury due to hydraulic liquid
2.2 Safety instructions in this manual
2.2.1 Identification of warning and danger signs
2.3 Safety devices
2.3.1 Safety instructions for starting the terminal
3 Product description
3.1 Overview and method of operation
3.1.1 Overview of CULTI CAM
3.1.2 Overview of COMMUNICATOR II
Backward compatibility
3.1.3 Overview of camera
3.1.4 Overview of UBM module
3.1.5 Overview of sensors
Working position switch
Travel speed sensor
Steering angle sensor
3.1.6 Overview of hydraulic system
3.1.7 Overview of cables
Main wiring loom
Tractor wiring loom
Camera connecting cable
3.1.8 Function of CULTI CAM
Visual principle
3.1.9 Possible applications and pre-conditions
Pre-conditions for row of plants
Pre-conditions for multiple row
3.1.10 Accuracy and signal quality
Signal quality
Hilly terrain
3.1.11 Plant pre-conditions
Green salad
Cauliflower
Witloof chicory
Strawberries
Sugar beets
3.2 Optional equipment
3.2.1 Optional machine equipment
3.2.2 Video monitor
Invalid signal
Valid signal
3.2.3 Xenon light
3.2.4 Extension cable
3.2.5 Bracket
Aluminium section bracket
Aluminium section
Connector bracket
3.3 Identification plates and identification number
3.3.1 Spare parts and technical questions
3.3.2 Position of identification plate
3.3.3 Explanation of camera identification plate
3.3.4 Explanation of COMMUNICATOR II identification plate
3.3.5 Explanation of UBM module identification plate
4 Operating and control elements
4.1 COMMUNICATOR II
4.1.1 Terminal
4.1.2 Terminal program
4.1.3 Main menu – ���Information���
4.1.4 Main menu – ���Settings���
4.1.5 Main menu – ���Terminal settings���
4.2 CULTI CAM
4.2.1 CULTI CAM application
4.2.2 Menu cards
atic control menu card
4.2.4 Application settings menu card
4.2.5 General settings menu card
4.2.6 Extended settings menu card
4.2.7 Information menu card
5 Technical specifications
5.1 COMMUNICATOR II
5.1.1 Specification
5.2 CULTI CAM
6 Preparing the product
6.1 General Information
6.1.1 General warnings
6.1.2 Turning off and securing the machine
6.2 Prior to operation
6.2.1 Before commissioning
6.2.2 Every time before putting into operation
6.3 Mounting
6.3.1 Camera
6.3.2 Adjusting the camera position
Adjusting t Plant row and multiple row
Detecting the camera height
Adjusting the camera angle
Detecting the camera angle
6.3.3 Operation and output
COMMUNICATOR II
6.3.4 Electronics
UBM module
6.3.5 Hydraulic system
6.3.6 Xenon light
6.4 CULTI CAM
6.4.1 Preparing calibration
6.4.2 Perform calibration
Calibration of travel speed sensor
Entering the value manually
Testing the control unit
Alternative:
Calibration of steering angle sensor
Calibration of maximum deflection
Adjusting the steering rate
Sensitivity
Setting the threshold value
Calibration of camera
Performing the camera calibration
6.4.3 Extended calibration
Factory settings
Alarm delay
Simulation speed
Inverting the position switch
Automatic centring
Twin-camera mode
7 Operation
7.1 Driving on the road
7.1.1 Road travel
7.2 Switching COMMUNICATOR II on/off
7.2.1 Engaging COMMUNICATOR II
7.2.2 Selecting an application
7.2.3 Switching COMMUNICATOR II off
7.3 Programmable COMMUNICATOR II keys
7.3.1 Key assignment
7.4 COMMUNICATOR II ISOBUS settings
7.4.1 Administration of applications
7.5 COMMUNICATOR II terminal settings
7.5.1 Setting the screen brightness/volume
7.5.2 Setting the language
7.5.3 Setting the display formats
7.5.4 Setting the date/time
7.5.5 Displaying the COMMUNICATOR II software version
7.6 Fieldwork
7.6.1 General settings
Xenon light
Dual offset
7.6.2 Setting an application
Row of plants
Multiple row
7.6.3 Automatic control
Activating automatic control
Deactivating automatic control
Side shifting
Dual offset
Xenon light
8 Faults and remedies
8.1 Overview of faults
8.1.1 CULTI CAM fault table
Hydraulic system fault
8.1.2 Questions and answers
9 Maintenance
9.1 General Information
9.1.1 General warnings
9.2 Maintenance Information
9.2.1 Maintenance intervals
10 Service
10.1 General Information
10.1.1 Spare parts and technical questions
10.1.2 Service and warranty
Warranty handling
11 Placing out of operation and disposal
11.1 General Information
11.1.1 Putting out of operation and disposal
12 Technical terms and abbreviations
12.1 Terms and explanations
12.1.1 Units
12.1.2 Abbreviations
12.1.3 Technical terms

00 1400 243 0.pdf:

AGROCOM MAP quick start guidefor importing a new machine description
! Please note: Please read the manual carefully and follow the instructions.
Step 1: Write data to the memory card on the PC in AGROCOM MAP
Step 2: On MOBILE CEBIS ��� set up the work record with CROP SENSOR
Step 3: Import the machine description on the PC into AGROCOM MAP

00 1400 244 0.pdf:

AGROCOM NET quick start guidefor importing a new machine description
! Please note: Please read the manual carefully and follow the instructions.
Write data to the memory card on the PC in AGROCOM NET
Step 2: On MOBILE CEBIS ��� set up the work record with CROP SENSOR
Step 3: Import the machine description on the PC into AGROCOM NET
00 1400 638 3.pdf:

GPS COPILOT S7
Table of contents
1 Introduction
1.1 General information
1.1.1 Validity of Manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Maintenance notes
1.1.7 Notes on warranty
1.1.8 Spare parts and technical questied use
1.2.1 Intended use of GPS COPILOT
1.2.2 Reasonably foreseeable misuse of GPS COPILOT
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 Meaning of Operator’s Manual
2.2.2 Update of terminal software
2.2.3 Observe the safety decals and warnings
2.2.4 Requirements made on all persons working with the product
2.2.5 Structural changes
2.2.6 Oquipment and spare parts
2.2.7 Use of USB devices
2.2.8 Operation only following proper putting into operation
2.2.9 Technical status
2.2.10 Hazards when driving on the road and on the field
Road travel
2.2.11 Electrocution by electrical system
2.2.12 Maintenance operations and repair work
3 Product description
3.1 Overview and method of operation
3.1.1 Overview of GPS COPILOT
3.1.2 Overview of terminal S7
3.1.3 Overview of correction signals
EGNOS/WAAS/MSAS
3.1.4 Overview of antennas
GNSS antenna
3.2 Optional equipment
3.2.1 GLONASS*
3.3 Identification plates and identification numbers
3.3.1 Identification plate of GPS COPILOT S7
3.3.2 Identification plate of terminal
4 Operating and display elements
4.1 Overview of terminal S7
4.1.1 Layout conventions of buttons and displays
4.2 GPS COPILOT menu structure
4.2.1 Start menu
4.2.2 Main menu overview
4.2.3 Overview of DGPS displays
4.2.4 menu
4.2.5 menu
4.2.6 menu
4.2.7 menu
4.2.8 menu
4.2.9 menu
4.2.10 menu
4.2.11 menu
4.2.12 menu
4.2.13 menu
4.2.14 menu
4.2.15 menu
4.2.16 menu
4.2.17 menu
4.2.18 menu
4.2.19 menu
menu
menu
5 Technical specifications
5.1 GPS COPILOT
5.1.1 Correction signal accuracy
5.1.2 GPS COPILOT specifications
5.2 Terminal S7
5.2.1 Specification
6 Preparing the product
6.1 Switching off and securing the machine
6.1.1 Shut down and secure the machine
6.2 Prior to putting into operation
6.2.1 Carry out prior to initial operation of GPS COPILOT
6.2.2 Carry out every time before putting the GPS COPILOT into operation
6.3 Initial setup of machine
6.3.1 Creating a vehicle profile
6.4 Initial operation of implement
6.4.1 Creating an implement profile check list
6.4.2 Creating an implement profile check list
6.4.3 Selecting the hitching type
6.4.4 Entering the implement dimensions
Setting the implement width
A special feature of the LEXION and TUCANO in the MONTANA variant
Setting the overlap or the gap
Working width
Setting the implement offset in longitudinal direction
Setting the implement offset in cross direction
6.5 Initial setup of correction signal
6.5.1 First initialisation of GNSS signal
6.5.2 Selecting the E-DIF correction type
6.5.3 Selecting the SBAS correction type
6.6 Discontinuing subscriptions
6.6.1 Entering the codes
7 Operation
7.1 Checklists
7.1.1 Preparing field use
7.1.2 Starting fieldwork
7.2 GPS COPILOT
7.2.1 Switching on the terminal
Start screen
7.2.2 Switching off the terminal
7.2.3 Operating the entry elements
Using the keyboard
Using the number pad
Using buttons with a stored list
7.2.4 Steering direction display
7.2.5 GPS status
7.2.6 Connecting the USB data memory
7.3 GPS settings
7.3.1 Setting BEIDOU
7.3.2 Setting GNSS
7.3.3 Setting the NMEA output
Limiting the NMEA output to the GPS signal
Saving the entries
Use of GNSS signal by other units
7.3.4 Setting E-DIF
Setting a reference point
Updating the reference point
7.3.5 Setting SBAS
7.4 System settings
7.4.1 Setting the view
Zooming in and out
Setting the display content mode
Setting the perspective
Hiding buttons
Showing buttons
7.4.2 Setting the language
7.4.3 Setting the units
7.4.4 Setting the time
GMT offset
7.4.5 Exchanging the controls
7.4.6 Switching the worked area signal on or off
7.4.7 Setting the day and night mode
7.4.8 Setting the display brightness
7.4.9 Setting the steering direction display
Sensitivity
7.4.10 Setting the grid
7.5 Vehicle settings
7.5.1 Loading the vehicle profile
7.5.2 Editing the vehicle profile
7.5.3 Exporting vehicle profiles
7.5.4 Importing vehicle profiles
7.5.5 Deleting vehicle profiles
7.6 Implement settings
7.6.1 Loading the implement profile
7.6.2 Editing an implement profile
7.6.3 Exporting implement profiles
7.6.4 Importing the implement profile
7.6.5 Deleting implement profiles
7.7 Task Management
7.7.1 Creating a job
Creating new job via the start menu
Creating new job via the job management
7.7.2 Editing notes
7.7.3 Loading a job
7.7.4 Finishing a job
7.7.5 Continuing the last used job
7.7.6 Exporting a job
7.7.7 Importing a job
7.7.8 Deleting a job
7.7.9 Creating a template
7.7.10 Using templates
7.7.11 Deleting templates
7.8 Field travel with GPS COPILOT
7.8.1 Overview of types of fieldwork
7.9 Boundaries and marks
7.9.1 Using the area counter
Recording the field boundary
Interrupting recording
Field boundary as a reference track
7.9.2 Setting marks
Custom marks
Setting custom marks
7.9.3 Approaching a mark
Selecting markers
Approaching a mark
7.10 Straight line tracking
7.10.1 Straight line guidance
7.10.2 Creating a reference track
7.10.3 Setting point B again
7.10.4 Straight line guidance with an angle (A=B angle)
7.10.5 Covering a field
Toggle mode
7.10.6 Loading A=B lines
7.10.7 Editing the designation of an A=B line
7.10.8 Relocating an A=B line
7.11 Circular line guidance
7.11.1 Use of circular line guidance
7.11.2 Creating a reference track
7.11.3 Covering a field
7.11.4 Loading a circular track
7.11.5 Relocating a circular track
7.12 Contour tracking
7.12.1 Use of contour line guidance
7.12.2 Recording a reference track
Recording a new reference track
7.12.3 Covering a field
Toggle mode
Lock function
7.13 Section View
7.13.1 Activating and deactivating the partial width display
7.13.2 Setting the partial width display
Entering the number of partial widths of the implement
Setting the widths of the individual partial implement widths
Setting the allowed overlap
Setting the time until switching-on
Setting the time until switching-off
7.13.3 Using the partial width display
8 Faults and remedies
8.1 Faults and solutions
8.1.1 GPS COPILOT system start
8.1.2 Faulty GNSS signal
8.1.3 EGNOS / WAAS / MSAS correction signals
8.1.4 Fault during track guidance
8.2 Terminal S7
8.2.1 Creating screenshots
8.3 Diagnostics
8.3.1 GPS setup
8.3.2 GPS status
8.3.3 E-DIF status
9 Maintenance
9.1 Maintenance interval overview
9.1.1 Every 100 operating hours or monthly
10 Putting out of operation and disposal
10.1 General information
10.1.1 Decommissioning and disposal
11 EC declaration of conformity
11.1 GPS COPILOT
11.1.1 EC Declaration of Conformity
12 Technical terms and abbreviations
12.1 GPS COPILOT
12.1.1 Abbreviations
12.1.2 Units

00 2348 427 0.pdf:

Table of contents
1 Introduction
1.1 General information
1.1.1 Validity of the manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2.1 Safety rules
2.1.1 General safety and accident prevention regulations
2.1.2 Interaction between terminal and machine or tractor
2.1.3 Electrocution by electrical system
3 Product description
3.1 Overview and method of operation
3.1.1 Overview of CEMIS 700
3.1.2 Function principle of CEMIS 700
3.2 Identification plates and identification numbers
3.2.1 Spare parts and technical questions
3.2.2 Identification plate of CEMIS 700
4 Information on the product
4.1 Software version
5 Operating and display elements
5.1 CEMIS 700
5.1.1 User interface
5.1.2 Terminal program
6 Technical specifications
6.1 CEMIS 700
6.1.1 Specification
7 Operation
7.1 CEMIS 700
7.1.1 Operating the CEMIS 700
7.1.2 Switching CEMIS 700 on
7.1.3 Switching CEMIS 700 off
7.2 Terminal settings
7.2.1 Making settings
Making settings with the rotary button
Making settings with the touch function
7.2.2 Setting the screen lighting
Daytime mode
Nighttime mode
Activating automatic key lighting
7.2.3 Setting the time and date
7.2.4 Displaying diagnosis information
On-board power supply voltage display
Display of CLAAS ISOBUS ECU address and name
7.2.5 Setting the language and display formats
Setting the language