Claas Liner 1650 (G00) Swathers Operator Manual EN

File List:

00 0295 823 3.pdf
00 2348 408 0.pdf
00 2348 427 0.pdf

00 0295 823 3.pdf:

LINER 1650 TWIN
Table of contents
1 To this Operator’s Manual
1.1 Notes on the manual
1.1.1 General instructions
1.1.2 Validity of manual
1.1.3 Using this manual
Directional indicators
1.1.4 Technical specifications
1.1.5 Symbols and notes
2 Safety
2.1 Safety rules
2.1.1 Particularly important
2.1.2 Qualification of drivers and maintenance personnel
2.1.3 Intended use
2.1.4 Reasonably foreseeable misuse
2.1.5 Safety and accident prevention regulations
2.1.6 First aid measures
2.1.7 Danger of injury from hydraulic liquid
2.2 Safety decals on the machine
2.2.1 Safety decals
2.2.2 Position of safety decals
3 Machine description
3.1 Overview and method of operation
3.1.1 Overview of LINER 1650 TWIN
3.1.2 Function of machine
3.2 Optional machine equipment
3.2.1 Additional windrowing rubber
3.2.2 Rear tandem axles
3.2.3 Spare wheel, 16×6.5-8
3.2.4 Wheel weights
3.2.5 Hydraulic system connectors, 1-fold
3.2.6 Slip-on yoke, 8-piece
3.2.7 Lighting adapter for USA
3.2.8 SMV triangle
3.3 Identification plates and vehicle identification number
3.3.1 Spare parts and technical questions
3.3.2 Position of identification plate
3.3.3 Position of identification number
3.3.4 Explanation of machine identification plate
3.4 Information on the machine
3.4.1 Decal
4 Operating and control elements
4.1 Rotor
4.1.1 Crank
4.1.2 Raking height scale
4.1.3 Rope
4.2 Hydraulic hose line
4.2.1 Shut-off tap
4.3 Jack stand
4.3.1 Knob
5 Technical specifications
5.1 LINER 1650 TWIN
5.1.1 Dimensions
5.1.2 Weights
5.1.3 Requirements on the tractor
5.1.4 Design
5.1.5 Tyre inflation pressure
5.1.6 Noise level
5.1.7 Lubricants
6 Machine preparation
6.1 Adapting the machine
6.1.1 Universal drive shaft – Checking the length
6.1.2 Universal drive shaft – Adapting the length
6.1.3 Fitting the universal drive shaft to the machine
6.1.4 Fitting the wheel weights*
6.2 Hitching the machine
6.2.1 Connecting the hitching bracket
6.2.2 Adjusting the hitching bracket
6.2.3 Installing the universal drive shaft
6.2.4 Connecting the hydraulic hose
6.2.5 Fitting the pull rope
6.2.6 Connecting the lighting cable
6.2.7 Stowing the wheel chocks
6.3 Unhitching the machine
6.3.1 Positioning the wheel chock at the wheel
6.3.2 Disconnecting the lighting cable
6.3.3 Disconnecting the pull rope
6.3.4 Disconnecting the hydraulic hoses
6.3.5 Removing the universal drive shaft
6.3.6 Unhitching the hitch bracket
6.4 Prepare road travel
6.4.1 General safety precautions
6.4.2 Folding in the safety frame
6.4.3 Removing the tine arms
6.4.4 Pushing the windrowing rubber to the inside
6.4.5 Arrest windrowing rubber in the transport position
6.4.6 Removing the additional windrowing rubber*
6.4.7 Folds the machine to transport position
6.4.8 Closing the shut-off tap
6.4.9 Fitting the safety bars
6.5 Preparing the working position
6.5.1 Removing protection strips
6.5.2 Opening the shut-off tap
6.5.3 Folding the machine to the working position
6.5.4 Fitting the tine arms
6.5.5 Folding the windrowing rubber to working position
6.5.6 Fitting the additional windrowing rubber*
6.5.7 Folding out the guard frames
6.6 Loading the machine
6.6.1 Lifting the machine
7 Operation
7.1 General safety precautions
7.1.1 Prior to operation
7.2 Driving on the road
7.2.1 Driving on public roads
7.3 Fieldwork settings
7.3.1 General instructions
7.3.2 Adjusting the swathing rotors
7.3.3 Raking height adjustment
7.3.4 Adjusting the windrowing rubber
7.3.5 Adjusting the second windrowing rubber*
7.3.6 Setting the headland position
7.3.7 Adjusting the hydraulic sequential control
7.3.8 Adjusting the steering angle stop
7.4 Fieldwork
7.4.1 Fieldwork
7.4.2 Observing the steering angle
7.4.3 Adjusting single-swath mode
Adjusting the rotor overlap
7.4.4 Adjusting twin swath mode
7.4.5 Swathing straw
Additional windrowing rubber*
7.4.6 Engaging the PTO shaft
Optimum PTO speed
7.4.7 Lifting the swathing rotors to the headland position
Hydraulic sequential control
8 Faults and remedies
8.1 Faults and remedies
8.1.1 Observe for troubleshooting
8.1.2 Hydraulics
8.1.3 Sensing wheels
9 Maintenance
9.1 Maintenance Information
9.1.1 General maintenance warnings
9.1.2 Electrical system
9.1.3 Protective guards
9.1.4 Spare parts
9.1.5 Unbalance
9.1.6 Compressed air and water
9.1.7 Wheels / tyres
9.1.8 Burn prevention
9.1.9 Oils
9.1.10 Fire prevention and explosion prevention
9.1.11 Lines, tubes and hoses
9.2 Overview maintenance intervals
9.2.1 Handling maintenance intervals
9.2.2 Before the harvest
9.2.3 After the first 10 operating hours
9.2.4 After the first 50 operating hours
9.2.5 Every 8 operating hours or daily
9.2.6 Every 20 operating hours
9.2.7 Every 50 operating hours
9.2.8 Every 100 operating hours
9.2.9 Every 250 operating hours
9.2.10 Every 500 operating hours or annually
9.2.11 As needed
9.2.12 After the harvest
9.3 Maintenance operations in general
9.3.1 Cleaning the machine
9.3.2 Preserve the machine
9.3.3 Preventing frost damage
9.3.4 Fastening material
9.4 Maintenance operations gearbox
9.4.1 Check gearbox tightness
9.4.2 Checking the main gearbox oil level
9.4.3 Changing the main gearbox oil
9.4.4 Retightening the main gearbox bolts
9.4.5 Checking the angle drive oil level
9.4.6 Changing the angle drive oil
9.4.7 Retightening the angle drive bolts
9.4.8 Checking the swathing gearbox oil level
9.4.9 Changing the swathing gearbox oil
9.4.10 Retightening the swathing gearbox bolts
9.5 Maintenance operations clutch
9.5.1 Adjusting the locking element clutch
9.6 Maintenance operations drive shaft
9.6.1 Maintaining drive shafts
9.6.2 Retightening the universal drive shaft nuts
9.7 Maintanance operations chassis
9.7.1 Check the tyre pressure
9.7.2 Changing a land wheel
9.7.3 Changing a sensing wheel
Rear tandem axle*
9.7.4 Check / adjust track
Adjusting the steering rod
9.7.5 Checking / adjusting the toe-in
9.8 Maintenance operations hydraulic
9.8.1 Hydraulic system maintenance
9.8.2 Maintaining hydraulic hoses
9.9 Frame maintenance work
9.9.1 Checking the hitching bracket
9.9.2 Checking the frame mounting
9.10 Rotor maintenance
9.10.1 Checking the swathing gearbox fastening
9.10.2 Checking the swathing rotor suspension
9.10.3 Adjusting releasing springs
9.10.4 Check bracket for tine bars
9.10.5 Check spring tines
9.11 Lubrication chart
9.11.1 Grease points to be greased every 20 h
9.11.2 Grease points to be greased every 50 h
9.11.3 Grease points to be greased every 100 h
9.11.4 Grease points to be greased every 250 h
10 Placing out of operation and disposal
10.1 General Information
10.1.1 Removal from service and disposal
11 EC declaration of conformity
11.1 EC Declaration of Conformity
12 Technical terms and abbreviations
12.1 Terms and explanations
12.1.1 Technical terms
12.1.2 Abbreviations

00 2348 408 0.pdf:

CEMIS 100
Table of contents
1 Introduction
1.1 General information
1.1.1 Validity of the manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2 Safety
2.1 Safety rules
2.1.1 General safety and accident prevention regulations
2.1.2 Interaction between terminal and machine or tractor
2.1.3 Electrocution by electrical system
3 Product description
3.1 Overview and method of operation
3.1.1 Overview of CEMIS 100
3.1.2 Function principle of CEMIS 100
3.2 Identification plates and identification numbers
3.2.1 Spare parts and technical questions
3.2.2 Identification plate of CEMIS 100
4 Operating and display elements
4.1 CEMIS 100
4.1.1 User interface for LINER
4.1.2 User interface for ROLLANT
4.1.3 User interface for UNIWRAP
5 Technical specifications
5.1 CEMIS 100
5.1.1 Specification
6 Operation
6.1 CEMIS 100
6.1.1 Operating the CEMIS 100
6.1.2 Switching CEMIS 100 on
6.1.3 Switching CEMIS 100 off
7 Maintenance
7.1 CEMIS 100
7.1.1 Daily
8 Putting out of operation and disposal
8.1 General information
8.1.1 Removal from service and disposal
9 Technical terms and abbreviations
9.1 Terms and explanations
9.1.1 Technical words
9.1.2 Abbreviations

00 2348 427 0.pdf:

CEMIS 700
Table of contents
1 Introduction
1.1 General information
1.1.1 Validity of the manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2 Safety
2.1 Safety rules
2.1.1 General safety and accident prevention regulations
2.1.2 Interaction between terminal and machine or tractor
2.1.3 Electrocution by electrical system
3 Product description
3.1 Overview and method of operation
3.1.1 Overview of CEMIS 700
3.1.2 Function principle of CEMIS 700
3.2 Identification plates and identification numbers
3.2.1 Spare parts and technical questions
3.2.2 Identification plate of CEMIS 700
4 Information on the product
4.1 Software version
5 Operating and display elements
5.1 CEMIS 700
5.1.1 User interface
5.1.2 Terminal program
6 Technical specifications
6.1 CEMIS 700
6.1.1 Specification
7 Operation
7.1 CEMIS 700
7.1.1 Operating the CEMIS 700
7.1.2 Switching CEMIS 700 on
7.1.3 Switching CEMIS 700 off
7.2 Terminal settings
7.2.1 Making settings
Making settings with the rotary button
Making settings with the touch function
7.2.2 Setting the screen lighting
Daytime mode
Nighttime mode
Activating automatic key lighting
7.2.3 Setting the time and date
7.2.4 Displaying diagnosis information
On-board power supply voltage display
Display of CLAAS ISOBUS ECU address and name
7.2.5 Setting the language and display formats
Setting the language
Setting display formats
7.2.6 Setting the volume
7.2.7 Deleting an ISOBUS implement
8 Maintenance
8.1 Maintenance
8.1.1 Daily
9 Putting out of operation and disposal
9.1 General information
9.1.1 Removal from service and disposal
10 Technical terms and abbreviations
10.1 Terms and explanations
10.1.1 Technical words
10.1.2 Abbreviations