komatsu pc14r 2 galeo hydraulic excavator operation and maintenance manual weam007700 1

komatsu pc14r 2 galeo hydraulic excavator operation and maintenance manual weam007700 2

komatsu pc14r 2 galeo hydraulic excavator operation and maintenance manual weam007700 3

komatsu pc14r 2 galeo hydraulic excavator operation and maintenance manual weam007700 4

komatsu pc14r 2 galeo hydraulic excavator operation and maintenance manual weam007700 5

Komatsu PC14R-2 Galeo Hydraulic Excavator Operation and Maintenance Manual WEAM007700

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: WEAM007700
Format: PDF
Size: 6.3MB
Number of Pages: 226

Category: Komatsu Operation and Maintenance Manual PDF

Model List:
- PC14R-2 Galeo Hydraulic Excavator

1. FOREWORD
2. INFORMATION ON SAFETY
3. INTRODUCTION
3.1. INTENDED USE OF THE MACHINE
3.2. IMPROPER OR UNAUTHORIZED USES
3.3. MAIN CHARACTERISTICS
3.4. RUNNINGIN
3.5. POSITIONS AND DIRECTIONS OF THE MACHINE
4. PRODUCT IDENTIFICATION
4.1. MACHINE SERIAL NUMBER
4.2. MACHINE IDENTIFICATION PLATE AND PRODUCT IDENTIFICATION NUMBER (PIN)
4.3. ENGINE SERIAL NUMBER AND EXHAUST GAS EMISSION PLATE
4.4. TRAVEL REDUCTION GEAR SERIAL NUMBER
4.5. SWING REDUCTION GEAR SERIAL NUMBER
4.6. SERIAL NUMBERS AND DEALERS ADDRESS
5. TABLE OF CONTENTS
6. SAFETY, NOISE AND VIBRATION PLATES
6.1. POSITION OF THE SAFETY PLATES
6.2. PICTOGRAMS AND RELEVANT MEANINGS
6.3. POSITION OF THE NOISE PLATES
6.4. VIBRATIONS TO WHICH THE OPERATOR IS SUBJECTED
7. GENERAL PRECAUTIONS
7.1. GENERAL SAFETY RULES
7.2. SAFETY DEVICES AND GUARDS
7.3. CLOTHING AND PERSONAL PROTECTION ITEMS
7.4. UNAUTHORIZED MODIFICATIONS
7.5. LEAVING THE OPERATOR SEAT
7.6. GETTING ON AND OFF THE MACHINE
7.7. PREVENTING FIRES DUE TO FUEL AND OIL
7.8. PREVENTING BURNS
7.9. PREVENTING DAMAGE DUE TO ASBESTOS POWDER
7.10. PREVENTING DAMAGE CAUSED BY THE WORK EQUIPMENT
7.11. FIRE EXTINGUISHERS AND FIRST AID KIT
7.12. PRECAUTIONS CONCERNING THE ROPS STRUCTURE
7.13. PRECAUTIONS CONCERNING THE EQUIPMENT
8. PRECAUTIONS TO BE TAKEN BEFORE STARTING THE ENGINE
8.1. SAFETY AT THE WORK SITE
8.2. FIRE PREVENTION
8.3. PRECAUTIONS CONCERNING THE OPERATOR SEAT
8.4. ROOM VENTILATION
8.5. PRECAUTIONS TO BE TAKEN FOR THE LIGHTS
9. PRECAUTIONS TO BE TAKEN WHEN WORKING
9.1. STARTING THE ENGINE
9.2. CHECK THE DIRECTION BEFORE STARTING THE MACHINE
9.3. HAND SIGNALS
9.4. CHECKS FOR TRAVELLING IN REVERSE
9.5. MOVING THE MACHINE
9.6. MOVING ON SLOPES
9.7. WORKING ON SLOPES
9.8. UNAUTHORIZED OPERATIONS
9.9. PREVENTING ELECTROCUTION
9.10. VISIBILITY
9.11. WORKING ON ICY OR SNOWCOVERED SURFACES
9.12. PREVENTING DAMAGE CAUSED BY THE WORK EQUIPMENT
9.13. WORKING ON LOOSE GROUND
9.14. PARKING THE MACHINE
10. TRANSPORTING THE MACHINE ON MOTOR VEHICLES
10.1. LOADING AND UNLOADING THE MACHINE
10.2. TRANSPORTING THE MACHINE
11. BATTERY
11.1. PREVENTING RISKS THAT MAY BE DUE TO THE BATTERY
11.2. STARTING WITH BOOSTER CABLES
12. PRECAUTIONS FOR THE REMOVAL OF THE MACHINE
13. PRECAUTIONS FOR MAINTENANCE
13.1. WARNING PLATES
13.2. TOOLS
13.3. MAINTENANCE STAFF
13.4. EQUIPMENT
13.5. WORKING UNDER THE MACHINE
13.6. CLEANING THE MACHINE
13.7. USE OF THE ENGINE DURING MAINTENANCE
13.8. PERIODICAL CHANGE OF THE PARTS THAT ARE CRITICAL FOR SAFETY
13.9. STOP THE ENGINE BEFORE CARRYING OUT ANY MAINTENANCE OPERATION OR INSPECTION
13.10. RULES TO BE FOLLOWED WHEN REFUELLING OR ADDING OIL
13.11. CHECKING THE COOLANT LEVEL IN THE RADIATOR
13.12. USING LAMPS
13.13. PRECAUTIONS TO BE TAKEN WHEN HANDLING THE BATTERY AND THE ALTERNATOR
13.14. PRECAUTIONS CONCERNING THE STARTER
13.15. HANDLING HIGHPRESSURE HOSES
13.16. PRECAUTIONS TO BE TAKEN WHEN HANDLING HIGHPRESSURE OIL
13.17. PRECAUTIONS FOR MAINTENANCE OPERATIONS AT HIGH TEMPERATURES AND HIGH PRESSURE
13.18. PRECAUTIONS TO BE TAKEN WHEN USING HIGHPRESSURE GREASE TO ADJUST THE TRACK TENSION
13.19. DO NOT REMOVE THE SHOCK ABSORBING SPRING FROM THE SHOCK ABSORBER UNIT
13.20. HYDRAULIC ACCUMULATOR
13.21. COOLING FAN AND BELT
13.22. WASTE MATERIALS
13.23. COMPRESSED AIR
13.24. PRECAUTIONS TO BE TAKEN WHEN HANDLING TECHNOPOLYMERS AND ELASTOMERS
13.25. PRECAUTIONS TO BE TAKEN WHEN USING SYNTHETIC BIODEGRADABLE OIL TYPE HEES
14. MACHINE ILLUSTRATIONS
14.1. OVERALL VIEW OF THE MACHINE
14.2. CONTROLS AND GAUGES
15. INSTRUMENTS AND CONTROLS
15.1. WARNING LIGHTS AND GAUGES
15.2. SWITCHES AND PUSH BUTTONS
15.3. CONTROL LEVERS AND PEDALS
15.4. COVERSWITH LOCK
15.5. ENGINE HOOD
15.6. RADIATOR COVER
15.7. BATTERY COVER
15.8. TILTING THE CAB FLOOR
15.9. FUSES
15.10. MAIN FUSE
15.11. TECHNICAL DOCUMENTATION COMPARTMENT
15.12. TOOL BOX
16. USE OF THE MACHINE AND RELATED CONTROLS
16.1. BEFORE STARTING THE ENGINE
16.2. STARTING THE ENGINE
16.3. AFTER STARTING THE ENGINE
16.4. STOPPING THE ENGINE
16.5. HOW TO MOVE THE MACHINE
16.6. STEERING THE MACHINE
16.7. SWINGING THE TURRET
16.8. WORK EQUIPMENT CONTROLS AND FUNCTIONS
16.9. UNAUTHORIZED OPERATIONS
16.10. PRECAUTIONS FOR USE
16.11. PRECAUTIONS TO BE TAKEN WHEN TRAVELLING ON SLOPES
16.12. GETTING THE MACHINE OUT OF MUD
16.13. OPERATIONS THAT CAN BE PERFORMED WITH THE HYDRAULIC EXCAVATOR
16.14. CHANGING THE BUCKET
16.15. PARKING THE MACHINE
16.16. CHECKING THE MACHINE EVERY DAY AFTER WORK
16.17. LOCKING THE MACHINE
16.18. RUBBER TRACKS (Machines equipped with rubber tracks only)
17. TRANSPORTING THE MACHINE
17.1. TRANSPORT PROCEDURE
17.2. LOADING AND UNLOADING THE MACHINE
17.3. LIFTING THE MACHINE
18. USING THE MACHINE IN THE COLD SEASON
18.1. PRECAUTIONS TO BE TAKEN WHEN USING THE MACHINE IN THE COLD SEASON
18.2. PRECAUTIONS TO BE TAKEN EVERY DAY AT THE END OF WORK
18.3. HOW TO PROCEED AT THE END OF THE COLD SEASON
19. LONG PERIODS OF INACTIVITY
19.1. BEFORE A PERIOD OF INACTIVITY
19.2. DURING A PERIOD OF INACTIVITY
19.3. AFTER A PERIOD OF INACTIVITY
20. TROUBLESHOOTING
20.1. IF FUEL RUNS OUT COMPLETELY
20.2. OCCURRENCES THAT ARE NOT FAILURES
20.3. REMOVING THE MACHINE
20.4. PRECAUTIONS TO BE TAKEN WHEN WORKING IN PARTICULAR CONDITIONS
20.5. IF THE BATTERY IS DOWN
20.6. OTHER TROUBLES
21. GUIDE TO MAINTENANCE
22. MAINTENANCE NOTES
22.1. OIL, FUEL AND COOLANT
22.2. NOTES ON THE MAINTENANCE OF THE ELECTRICAL SYSTEM
22.3. NOTES ON THE MAINTENANCE OF THE HYDRAULIC SYSTEM
22.4. MAINTENANCE NOTES REGARDING LUBRICATION
23. PARTS SUBJECT TO WEAR
23.1. LIST OF THE PARTS SUBJECT TO WEAR
24. FUEL, COOLANT AND LUBRICANTS
24.1. APPROVED SYNTHETIC BIODEGRADABLE LUBRICANTS TYPE HEES
25. TIGHTENING TORQUES
25.1. STANDARD TIGHTENING TORQUES FOR SCREWS AND NUTS
25.2. STANDARD TIGHTENING TORQUES FOR HOSES WITH ORFS
26. LUBRICATION
26.1. LUBRICATION DIAGRAM
27. PERIODICAL CHANGE OF SAFETYRELATED COMPONENTS
27.1. SAFETYRELATED PARTS
28. MAINTENANCE PLAN
28.1. MAINTENANCE PLAN
28.2. MAINTENANCE INTERVALS IN CASE OF USE OF THE HYDRAULIC BREAKER
29. MAINTENANCE PROCEDURES
29.1. WHEN REQUIRED
29.2. CHECKS TO BE CARRIED OUT BEFORE STARTING THE ENGINE
29.3. MAINTENANCE AFTER THE FIRST 50 HOURS OF OPERATION (Only for machines in which synthetic biodegradable oil type HEES is used)
29.4. MAINTENANCE AFTER THE FIRST 500 HOURS OF OPERATION (Only for machines in which synthetic biodegradable oil type HEES is used)
29.5. MAINTENANCE EVERY 500 HOURS OF OPERATION
29.6. MAINTENANCE EVERY 1000 HOURS OF OPERATION
29.7. MAINTENANCE EVERY 2000 HOURS OF OPERATION
30. TECHNICAL DATA
31. LIFTING CAPACITIES
31.1. LIFTING CAPACITIES
32. AUTHORIZED OPTIONAL EQUIPMENT
32.1. PRECAUTIONS REGARDING SAFETY
32.2. PRECAUTIONS REGARDING THE INSTALLATION OF EQUIPMENT
32.3. CHARACTERISTICS OF THE OPTIONAL EQUIPMENT
33. MACHINE CONFIGURATION FOR THE INSTALLATION OF ATTACHMENTS
33.1. POSITION OF THE DEVICES
33.2. HYDRAULIC CIRCUIT
34. OPERATING THE EQUIPMENT
34.1. LONG PERIODS OF INACTIVITY
35. PRECAUTIONS TO BE TAKEN WHEN USING OPTIONAL EQUIPMENT
35.1. HYDRAULIC BREAKER

Rate this product