komatsu pc700lc 11 hydraulic excavator field assembly manual gen00155 05 1

komatsu pc700lc 11 hydraulic excavator field assembly manual gen00155 05 2

komatsu pc700lc 11 hydraulic excavator field assembly manual gen00155 05 3

komatsu pc700lc 11 hydraulic excavator field assembly manual gen00155 05 4

komatsu pc700lc 11 hydraulic excavator field assembly manual gen00155 05 5

Komatsu PC700LC-11 Hydraulic Excavator Field Assembly Manual GEN00155-05

$20.00

Type Of Manual: Field Assembly Manual
Manual ID: GEN00155-05
Format: PDF
Size: 17.4MB
Number of Pages: 165

Category: Komatsu Operation and Maintenance Manual PDF

Model List:
- PC700LC-11 Hydraulic Excavator

1. COVER
2. FOREWORD
3. CONTENTS
4. SPECIFICATIONS
5. PRECAUTIONS FOR FIELD ASSEMBLY
6. DISPOSAL OF REMOVED PARTS
7. ASSEMBLING PROCEDURES, APPLICABLE EQUIPMENT AND SCHEDULE
8. KIT LAYOUT DIAGRAM
9. FLOW OF FIELD ASSEMBLY
10. TRANSPORTATION
11. LIST OF TOOLS FOR FIELD ASSEMBLING
12. TIGHTENING TORQUE
13. COATING MATERIALS
14. SELECTION OF WIRE ROPES USED FOR ASSEMBLY
15. SELECTION OF NYLON SLINGS USED FOR ASSEMBLY
16. Assembly of Chassis
16.1. A1 Installation of Left and Right Track Frames
16.2. A2 Installation of Travel Pipe
16.3. A3 Installation of Operator Cabs Door Stopper and Striker
16.4. A4 Installation of Radiator Cover
16.5. A5 Installation of Rearview Mirror
16.6. A6 Installation of Handrail
16.7. A7 Installation of Step
16.8. A8 Installation of Left Side Step
16.9. A9 Sticking Sheet to Counterweight
16.10. A10 Installation of Rearview Camera and Komvision Camera (Option)
16.11. A11 Installation of Counterweight
16.12. A12 IInstallation of Step Light
16.13. A13 Installation of Travel Piping Cover
16.14. A14 Testing Track Shoe Tension
17. Assembling of Work Equipment
17.1. B1 Assembly of Arm Cylinder
17.2. B2 Connection of Arm Cylinder Hoses
17.3. B3 Installation of Boom Cylinder
17.4. B4 Installation of Boom Cylinder Hoses
17.5. B5 Installation of Boom Foot Dust Seal
17.6. B6 Installation of Boom Assembly
17.7. B7 Installation of Hoses from Chassis Along Top of Boom
17.8. B8 Connection of Boom Cylinder Head
17.9. B9 Installation of Arm Assembly
17.10. B10 Installation of Bucket Cylinder Hoses between Boom and Bucket Cylinder
17.11. B11 Installation of Bucket
17.12. B12 Connection of Work Equipment Grease Piping
17.13. B13 Connection of Work Equipment Wiring
17.14. B14 Greasing after Assembling Work Equipment
17.15. B15 Bleeding Air from Work Equipment Circuit
17.16. B16 Releasing Remaining Pressure from Hydraulic Circuit
18. Procedure for Inspection and Maintenance after Completion of Assembly
18.1. M1 Replacement of Return Filter (Standard Filter to Flushing Filter)
18.2. M2 Flushing of Hydraulic Circuit
18.3. M3 Replacement of Return Filter (Flushing Filter to Standard Filter)
18.4. M4 Bleeding Air from Work Equipment Circuit
18.5. M5 Check of Oil/Coolant Level at Each Part
18.6. M6 Inspection of Oil Level in Hydraulic Tank and Refill
18.7. M7 Parts to be Touched up After Field Assembly
18.8. M8 Confirmation of Failure
18.9. M9 ADJUST KomVision Camera angle (KomVision Spec.) (Camera calibration and 12 m visibility check)
19. Mounting bolt torque check sheet
20. Field Assembly Inspection Report (Backhoe)

Rate this product