new holland 20 25 boomer stage iiia compact tractor operation and maintenance manual 51559567 1

new holland 20 25 boomer stage iiia compact tractor operation and maintenance manual 51559567 2

new holland 20 25 boomer stage iiia compact tractor operation and maintenance manual 51559567 3

new holland 20 25 boomer stage iiia compact tractor operation and maintenance manual 51559567 4

new holland 20 25 boomer stage iiia compact tractor operation and maintenance manual 51559567 5

New Holland 20, 25 Boomer Stage IIIA Compact Tractor Operation and Maintenance Manual 51559567

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: 51559567
Format: PDF
Size: 28.2MB
Number of Pages: 266
Serial Number:
51559567

Category: New Holland Operator Manual PDF

Model List:
- 20 Boomer Stage IIIA Compact Tractor
- 25 Boomer Stage IIIA Compact Tractor

1. GENERAL INFORMATION
1.1. Note to the owner
1.2. Intended use
1.3. ElectroMagnetic Compatibility (EMC)
1.4. Manual scope and required training level
1.5. Metric and Imperial units abbreviations
1.6. Product Identification Number (PIN)
1.7. Operators manual storage
1.8. Machine orientation
2. SAFETY INFORMATION
2.1. Safety rules and signal word definitions
2.2. Safety rules
2.3. Starting the machine
2.4. Parking the machine
2.5. Ecology and the environment
2.6. Safety aspects in accordance with Regulation (EU) 1322/2014 Annex XXII and subsequent amendments and modifications
2.7. Airborne noise emission
2.8. Vibration levels
2.9. Machine stability
2.10. Safety signs
2.11. Instructional signs
2.12. Instructional signs
2.13. International symbols
3. CONTROLS AND INSTRUMENTS
3.1. OPERATORS SEAT
3.1.1. Seat belt
3.1.2. Seat controls
3.1.3. Roll Over Protective Structure (ROPS)
3.2. FORWARD CONTROLS
3.2.1. Instrument panel
3.2.2. Cruise control
3.2.3. Clutch pedal
3.2.4. Brake pedal (HST)
3.2.5. Brake pedals (Mechanical)
3.2.6. Hand brake lever Control identification
3.2.7. Foot throttle pedal (Mechanical)
3.2.8. Hand throttle lever
3.2.9. Power Take Off (PTO) switch (HST)
3.2.10. Power Take Off (PTO) switch (Mechanical)
3.2.11. Stationary Power TakeOff (PTO) switch
3.2.12. Key switch (HST)
3.2.13. Key switch (Mechanical)
3.2.14. Differential lock pedal (HST)
3.2.15. Differential lock pedal (Mechanical)
3.2.16. Hydrostatic transmission control pedals
3.2.17. Multifunction light switch
3.3. LEFTHAND SIDE CONTROLS
3.3.1. Transmission range lever
3.3.2. FourWheel Drive (4WD)
3.3.3. Hand brake lever Control identification
3.4. RIGHTHAND SIDE CONTROLS
3.4.1. Transmission main shift lever
3.4.2. Hydraulic Power Lift (HPL)
3.4.3. Hydraulic Power Lift (HPL) drop rate control valve
3.4.4. Hydraulic rear remote valve (HST)
3.4.5. Hydraulic rear remote valve (Mechanical)
3.4.6. Mid mount two spool hydraulic valve (optional)
3.4.7. Power Take Off (PTO) controls (HST) Selection lever
3.4.8. Power Take Off (PTO) controls (Mechanical) Selection lever
3.5. EXTERIOR CONTROLS
3.5.1. Hood latch
4. OPERATING INSTRUCTIONS
4.1. COMMISSIONING THE UNIT
4.1.1. Engine breakin procedure
4.1.2. Power Take Off (PTO) operation (HST)
4.1.3. Power Take Off (PTO) operation (Mechanical)
4.1.4. Threepoint hitch
4.1.5. Threepoint hitch adjustments
4.1.6. Tractor drawbar
4.1.7. Top link
4.2. STARTING THE UNIT
4.2.1. Starting the engine (Mechanical)
4.2.2. Starting the engine (Hydrostatic transmission)
4.2.3. Cold starting aids
4.2.4. Operator presence system
4.2.5. Starting the tractor with jumper cables
4.3. STOPPING THE UNIT
4.3.1. Stopping the engine
4.3.2. Emergency stopping (HST)
4.3.3. Emergency stopping (Mechanical)
4.3.4. Brakes (HST)
4.3.5. Brakes (Mechanical)
4.3.6. Park brake (HST)
4.3.7. Park brake (Mechanical)
4.4. MOVING THE UNIT
4.4.1. Steering operation
4.4.2. Transmission operation at low ambient temperatures
4.4.3. Hydrostatic transmission (HST) operation
4.4.4. Mechanical transmission operation
4.5. PARKING THE UNIT
4.5.1. Parking the unit (HST)
4.5.2. Parking the unit (Mechanical)
5. TRANSPORT OPERATIONS
5.1. ROAD TRANSPORT
5.1.1. Transport lighting
5.1.2. Hazard warning light operation
5.1.3. Turn signal operation
5.1.4. Road lights operation
5.1.5. Work lights operation
5.1.6. Brake light operation (HST)
5.1.7. Brake light operation (Mechanical)
5.1.8. Rear work light (optional)
5.1.9. Driving the vehicle (HST)
5.1.10. Driving the vehicle (Mechanical)
5.2. SHIPPING TRANSPORT
5.2.1. Carrying the tractor on a transporter
5.3. RECOVERY TRANSPORT
5.3.1. Towing the tractor for recovery
6. WORKING OPERATIONS
6.1. GENERAL INFORMATION
6.1.1. Tractor ballasting
6.1.2. Tractor ballasting weights
7. MAINTENANCE
7.1. GENERAL INFORMATION
7.1.1. General information
7.1.2. Torque Minimum tightening torques for normal assembly
7.1.3. Standard torque data for hydraulics Standard torque data for hydraulics
7.1.4. Battery disconnect switch
7.1.5. General specification Diesel fuel
7.1.6. Biodiesel fuel
7.1.7. Refueling the tractor
7.1.8. Change engine coolant to Organic Acid Technology (OAT) coolant
7.1.9. Tractor jacking points
7.1.10. Fluids and lubricants
7.2. MAINTENANCE CHART
7.2.1. Maintenance chart
7.3. Every 10 hours or daily
7.3.1. Engine oil level Check
7.4. After the first 50 hours of operation
7.4.1. Engine oil and oil filter Change
7.4.2. Fuel filter Replace
7.4.3. Hydrostatic Transmission (HST) oil filter Replace
7.4.4. Wheel bolts and nuts Check
7.5. Every 50 hours
7.5.1. Grease fitting Lubrication
7.5.2. Transmission fluid level Check
7.5.3. Brake pedal free play Adjust
7.5.4. Hydrostatic transmission (HST) neutral adjustment Check
7.5.5. Fan belt Check
7.5.6. Tires pressure Check
7.5.7. Front axle differential fluid level Check
7.5.8. Air cleaner Clean
7.6. Every 100 hours
7.6.1. Fuel filter water separator Drain fluid
7.7. Every 300 hours
7.7.1. Engine Change fluid
7.7.2. Hydraulic oil filter Replace
7.7.3. Hydrostatic Transmission (HST) oil filter Replace
7.7.4. Fuel filter Replace
7.7.5. Fan belt Adjust
7.7.6. Roll Over Protective Structure (ROPS) Check
7.7.7. Wheel bolts and nuts Check
7.7.8. Front wheel toe in Check
7.7.9. Air cleaner element Replace
7.7.10. Hydrostatic Transmission (HST) cooling fan Clean
7.8. Every 600 hours
7.8.1. Front axle differential oil Change fluid
7.8.2. Transmission fluid Change
7.9. Every 1000 hours
7.9.1. Engine coolant Change
7.10. General maintenance
7.10.1. Fuel injection system Bleed
7.10.2. Fuel injectors Bleed
7.10.3. Hydrostatic Transmission (HST) neutral position Check and Adjustment
7.10.4. Fan belt Adjust
7.10.5. Roll Over Protective Structure (ROPS) Check
7.10.6. Battery Test
7.10.7. Alternator and drive belt Check
7.10.8. Fuses Check
7.10.9. Maxi fuse Replace
7.10.10. Tail/brake light bulb Replace
7.10.11. Turn signal/hazard light bulb Replace
7.10.12. Wheel bolt / nut Check
7.10.13. Front wheel toe in Check
7.10.14. Brake pedal free play Hydrostatic Transmission (HST) Adjust
7.10.15. Brake pedal free play Mechanical transmission Adjust
7.10.16. Clutch pedal free play Mechanical transmission Adjust
7.11. STORAGE
7.11.1. Preparing for storage
7.11.2. Removal from storage Tractor
8. TROUBLESHOOTING
8.1. SYMPTOM(S)
8.1.1. Engine Troubleshooting
8.1.2. Mechanical service brakes Troubleshooting
8.1.3. Hydraulic Lift System Troubleshooting
8.1.4. Steering Troubleshooting
8.1.5. Hydrostatic transmission Troubleshooting
8.1.6. Clutch Troubleshooting
8.1.7. Electrical system Troubleshooting
9. SPECIFICATIONS
9.1. Wheel tread settings
9.2. Tire pressures and permissible loads
9.3. General specifications
9.4. General specifications
9.5. Tractor dimensions
10. FORMS AND DECLARATIONS
10.1. Predelivery report Owner copy
10.2. Predelivery report Dealer copy

Rate this product