komatsu pc5500 6 hydraulic mining shovel operation and maintenance manual ompc550015035d 1

komatsu pc5500 6 hydraulic mining shovel operation and maintenance manual ompc550015035d 2

komatsu pc5500 6 hydraulic mining shovel operation and maintenance manual ompc550015035d 3

komatsu pc5500 6 hydraulic mining shovel operation and maintenance manual ompc550015035d 4

komatsu pc5500 6 hydraulic mining shovel operation and maintenance manual ompc550015035d 5

Komatsu PC5500-6 Hydraulic Mining Shovel Operation and Maintenance Manual OMPC550015035D

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: OMPC550015035D
Format: PDF
Size: 10.8MB
Number of Pages: 527

Category: Komatsu Operation and Maintenance Manual PDF

Model List:
- PC5500-6 Hydraulic Mining Shovel

1. MAIN MENU
2. COVER
3. INTRODUCTION
3.1. CONTENTS OF THE BINDER
3.2. DIVISION OF THE BINDER
3.3. DESIGNATED USE OF THE SHOVEL
3.4. DELIVERY OF THE SHOVEL
3.5. EXPLANATION OF ABBREVIATIONS
3.6. TABLE OF CONTENTS
4. SAFETY
4.1. SAFETY INSTRUCTIONS
4.1.1. WARNINGS AND SYMBOLS
4.1.2. BASIC OPERATION AND DESIGNATED USE OF THE HYDRAULIC SHOVEL
4.1.3. ORGANIZATIONAL MEASURES
4.1.4. SELECTION AND QUALIFICATION OF PERSONNEL BASICRESPONSIBILITIES
4.1.5. SAFETY INSTRUCTIONS GOVERNING SPECIFIC OPERATIONAL PHASES
4.1.6. WARNING OF SPECIAL DANGERS
4.1.7. TRANSPORTING AND TOWING RECOMMISSIONING
4.1.8. SPECIAL SAFETY EQUIPMENT
4.1.9. SAFETY HARNESS IN CONFORMITY WITH EN 361 (EUROPEANSTANDARD)
5. OPERATION
5.1. FOREWORD
5.2. CONSTRUCTION OF THE SHOVEL
5.2.1. OVERALL VIEW
5.2.2. UNDERCARRIAGE AND SUPERSTRUCTURE
5.2.3. HYDRAULICALLY OPERATED ACCESS LADDER
5.2.4. EMERGENCY ESCAPE LADDER
5.2.5. EMERGENCY ENGINE SHUTDOWN FROM GROUND MAN OR OPERATOR WARNING SYSTEM
5.2.6. OPERATORS CAB WITH INTEGRATED FALLING OBJECT PROTECTIVE STRUCTURE (FOPS)
5.2.7. ENGINE OIL MANAGEMENT SYSTEM
5.3. OPERATORS CAB CONTROLS
5.3.1. CONTROLS WITH BACKHOE ATTACHMENT
5.3.2. CONTROLS WITH BOTTOM DUMP BUCKET ATTACHMENT
5.3.3. OPERATORS CONSOLE
5.3.4. INTERFACE PANEL FOR DIAGNOSTICS AND CONTROLS FOR HEATING AND AIR CONDITIONING
5.4. ELECTRONIC MONITORING AND CONTROL SYSTEM ECS
5.4.1. INTRODUCTION
5.4.2. OPERATING THE ELECTRONIC MONITORING SYSTEM
5.4.3. AUTOMATIC DISPLAY OF MESSAGES
5.4.4. MENU CONTROL AND SERVICE FUNCTIONS
5.4.5. MENU CONTROL LIST
5.4.6. FAULT AND INFORMATION MESSAGE LIST
5.5. OPERATING THE HEATER, VENTILATION AND AIRCONDITIONING
5.5.1. A HEATING
5.5.2. B COOLING
5.5.3. COMBINED OPERATION OF AIR CONDITIONING AND HEATING
5.5.4. AUXILIARY HEATER FOR OPERATORS CAB
5.6. MACHINERY HOUSE
5.6.1. EMERGENCY ENGINE SHUTDOWN SWITCHES
5.6.2. SAFETY SWITCH FOR MAINTENANCE
5.6.3. CONTROL AND FILTER PANEL OF REAR AND FRONT POWER UNIT
5.7. ELECTRICAL EQUIPMENT IN CAB BASE
5.7.1. STANDARD COMPONENTS IN CAB BASE
5.7.2. SWITCH BOARD (X2) IN CAB BASE
5.7.3. CENSE ENGINE MONITORING SYSTEM (SPECIAL EQUIPMENT)
5.7.4. COMPONENTS OF ELECTRICAL PREHEATING SYSTEM IN CAB BASE
5.8. PREHEATING SYSTEMS FOR OIL, COOLANT AND BATTERIES
5.9. CHECKS BEFORE STARTING THE ENGINES
5.10. STARTING THE ENGINES
5.10.1. STARTING PROCEDURE
5.11. MOVING THE SHOVEL
5.11.1. TRAVEL CONTROL WITH FOOT PEDALS
5.11.2. TRAVELLING INSTRUCTIONS
5.12. SLEWING AND BRAKING THE SUPERSTRUCTURE
5.12.1. SLEWING THE SUPERSTRUCTURE
5.13. WORKING WITH THE ATTACHMENT
5.13.1. MACHINES EQUIPPED WITH EURO CONTROL SYSTEM
5.13.2. MACHINES EQUIPPED WITH KMG CONTROL SYSTEM
5.13.3. BOTTOM DUMP BUCKET
5.13.4. DROP BALL OPERATION
5.13.5. COMBINED OPERATION CYCLES
5.14. WORKING INSTRUCTIONS
5.14.1. STABILITY OF THE SHOVEL
5.14.2. SHOVEL OPERATION
5.15. PARKING THE SHOVEL
5.16. STOPPING THE ENGINES
5.16.1. RELIEVE PRESSURE IN THE HYDRAULIC SYSTEM
5.17. OPERATION OF THE LUBRICATION SYSTEM
5.17.1. CENTRAL LUBRICATION SYSTEM CLS FOR SUPERSTRUCTURE AND ATTACHMENT
5.17.2. SWING CIRCLE PINION LUBRICATION SYSTEM SLS
5.18. FIRE DETECTION AND SUPPRESSION SYSTEM
5.18.1. HIGH LEVEL ALARM FIRE
5.18.2. ENGINE SHUTDOWN THROUGH FUEL SHUTOFF SOLENOID VALVE
5.18.3. ACTUATION MODES OF THE FIRE SUPPRESSION SYSTEM
5.18.4. INDICATION OF OPERATIONAL MODES AT CONTROL MODULE, AFTER AUTOMATIC ACTUATION OF THE FIRE S…
5.18.5. LOCATION OF THE EXTINGUISHING AGENT TANK ASSEMBLIES AND EXPELLANT GAS CARTRIDGES ON POWER…
5.19. CENTRAL REFILLING SYSTEM
5.19.1. SYSTEMS CONNECTED TO THE REFILLING SYSTEM
5.19.2. OPERATING THE HYDRAULIC SERVICE ARM
5.19.3. RECEIVER PANEL WITH MONITOR BOX
5.19.4. REFILLABLE GREASE CONTAINERS OF THE AUTOMATIC LUBRICATION SYSTEMS
5.20. SERVICE CRANE (SPECIAL EQUIPMENT)
5.20.1. OPERATING THE CRANE
5.21. WORK ON THE LOADER ATTACHMENT
5.22. TRANSPORTATION AND LIFTING OF THE SHOVEL
5.22.1. DISASSEMBLING OF THE SHOVEL
5.22.2. TRANSPORTATION AND LIFTING
5.23. RETRIEVAL PROCEDURE
5.24. SHOVEL STORAGE
5.24.1. PREPARING FOR STORAGE
5.24.2. ONE MONTH REPETITIVE SERVICE PERIOD
5.24.3. SIX MONTH REPETITIVE SERVICE PERIOD
5.24.4. PREPARING FOR OPERATION
5.25. TROUBLE SHOOTING
5.25.1. ENGINE
5.25.2. HYDRAULIC SYSTEM
5.25.3. FINAL DRIVES AND SWING GEAR
5.25.4. CRAWLER TRACKS
6. MAINTENANCE
6.1. FOREWORD
6.2. PRECAUTIONS FOR MAINTENANCE
6.3. FUEL AND LUBRICANTS
6.4. FILLING CAPACITIES
6.5. STANDARD TORQUE LIST
6.6. LUBRICATION AND MAINTENANCE SCHEDULE
6.6.1. INITIAL SERVICING
6.6.2. PERIODIC SERVICING INTERVALS
6.6.3. PERIODIC SERVICING SCHEDULE
6.6.4. EXTENDED SERVICE INTERVALS FOR ENGINES WITH ENGINE OIL MANAGEMENT SYSTEM
6.6.5. RESETTING THE ENGINE OIL BURNING SYSTEM CENTINEL
6.6.6. MAINTENANCE OF THE ENGINES
6.6.7. ENGINE FUEL FILTER LOCATIONS
6.7. WHEN NECESSARY
6.7.1. ENGINE AIR CLEANER MAINTENANCE
6.7.2. SWING CIRCLE TOOTHING LUBRICATION
6.7.3. AUTOMATIC LUBRICATION SYSTEMS FILL GREASE CONTAINERS
6.7.4. TRACK ROLLERS AND GUIDE WHEELS REPLACE FLOATING SEALS
6.7.5. COLD STARTING AID, REPLACE FLUID CYLINDER
6.8. EVERY 10 OPERATING HOURS OR DAILY
6.8.1. WALK AROUND INSPECTION
6.8.2. AIR CLEANER CLEAN PRECLEANER
6.8.3. RADIATORS CHECK COOLANT LEVEL
6.8.4. TRACK GROUPS CLEAN
6.9. EVERY 50 OPERATING HOURS OR WEEKLY
6.9.1. SWING GEARS AND MOTOR ADAPTER HOUSINGS CHECK OIL LEVELS
6.9.2. TRAVEL GEARS, MOTOR ADAPTER HOUSINGS AND FINAL DRIVES CHECK OIL LEVELS
6.9.3. PTOs (PUMP DISTRIBUTOR GEARS) AND OIL RESERVOIR CHECK OIL LEVEL
6.9.4. HYDRAULIC ACCESS LADDER CHECK SAFETY SENSOR
6.9.5. HYDRAULIC OIL COOLERS INSPECT AND CLEAN IF NECESSARY
6.10. EVERY 250 OPERATING HOURS OR MONTHLY
6.10.1. AIR CONDITIONING COMPRESSOR CHECK DRIVE BELT TENSION
6.10.2. SIGNAL HORN COMPRESSOR LUBRICATE
6.10.3. HYDRAULIC OIL COOLER FAN BEARINGS CHECK FOR LEAKAGE AND CLEAN BREATHER FILTER
6.10.4. RADIATOR FAN BEARINGS CHECK FOR LEAKAGE AND CLEAN BREATHER FILTER
6.10.5. AUTOMATIC LUBRICATION SYSTEMS CLEAN INLINE GREASE FILTER AND CHECK BREATHER FILTER
6.10.6. CAB AIR CLEANER CLEAN OR REPLACE FILTER ELEMENT
6.10.7. AIR CONDITIONING FOR OPERATORS CAB CHECK REFRIGERANT LEVEL
6.11. EVERY 500 OPERATING HOURS OR QUARTERLY
6.11.1. BATTERIES CHECK FLUID LEVEL
6.11.2. FLEXIBLE DRIVE COUPLINGS CHECK OIL LEVEL
6.11.3. FUEL TANK DRAIN CONDENSATION
6.11.4. CRAWLER TRACK INSPECTION
6.12. EVERY 1000 OPERATING HOURS OR EVERY 6MONTH
6.12.1. HIGH STRENGTH BOLT CONNECTIONS CHECK TORQUE LOAD
6.12.2. HYDRAULIC SYSTEM FILTER SERVICE
6.12.3. PTOS (PUMP DISTRIBUTOR GEARS), SWING GEARS AND TRAVEL GEARS OIL SAMPLE ANALYSIS
6.12.4. SIGNAL HORN COMPRESSOR CLEAN AND LUBRICATE
6.12.5. HYDRAULIC TRACK TENSIONING SYSTEM CHECK PRESSURE ACCUMULATORS
6.12.6. WATER FILTER REPLACE FILTER CARTRIDGE
6.12.7. HYDRAULIC OIL COOLER INSPECT AND LUBRICATE DOOR HINGES
6.12.8. MACHINERY HOUSE DOORS INSPECT AND LUBRICATE DOOR HINGES
6.13. EVERY 2000 OPERATING HOURS OR YEARLY
6.13.1. HYDRAULIC SYSTEM CHANGE OIL, REPLACE SUCTION STRAINERS AND PULSATION DAMPER
6.13.2. EMERGENCY ESCAPE LADDER INSPECTION
6.14. EVERY 3000 OPERATING HOURS HOWEVER AT LEAST ONCE A YEAR
6.14.1. SWING GEARS AND MOTOR ADAPTER HOUSING CHANGE OIL
6.14.2. TRAVEL GEARS, MOTOR ADAPTER HOUSINGS AND FINAL DRIVES CHANGE OIL
6.14.3. PTO (PUMP DISTRIBUTOR GEAR) CHANGE OIL
6.15. FIRE PREVENTION
6.16. WELD REPAIRS
6.16.1. PROTECTIVE MEASURES BEFORE STARTING WELD REPAIRS ON THE UNDERCARRIAGE
6.16.2. PROTECTIVE MEASURES BEFORE STARTING WELD REPAIRS ON THE LOADER ATTACHMENT
6.16.3. PROTECTIVE MEASURES BEFORE STARTING WELD REPAIRS ON THE SUPERSTRUCTURE
6.16.4. AFTER FINISHING THE REPAIR WELDINGS ON THE SUPERSTRUCTURE

Rate this product