IMT 5016 Crane Parts and Specifications 99900199 16 July 2020

Table of Content:

1 ELECTRONIC MANUALS
2 INTRODUCTION
3 SPECIFICATIONS
3.1 GENERAL SPECIFICATIONS
3.2 PERFORMANCE CHARACTERISTICS
3.3 POWER SOURCE
3.4 ROTATION SYSTEM
3.5 CYLINDER HOLDING VALVES
3.6 CAPACITY ALERT SYSTEM
3.7 WINCH
3.8 HYDRAULIC SYSTEM
3.9 MINIMUM CHASSIS SPECIFICATIONS
3.10 GEOMETRIC CONFIGURATION
3.11 CAPACITY CHART
4 CRANE REFERENCE
4.1 MAJOR CRANE ASSEMBLIES
4.2 WELDMENT PART NUMBER LOCATIONS
4.3 GREASE ZERK LOCATIONS & LUBRICANT REQUIREMENTS
4.4 RECOMMENDED SPARE PARTS LIST
4.5 INSTALLATION
4.6 CRANE INSTALLATION
4.7 HYDRAULIC INSTALLATION
4.8 CONTROL VALVE TROUBLESHOOTING
4.9 RELAY BOARD OPERATION
4.10 FLIP-UP BOOM SHEAVE
4.11 WINCH TROUBLESHOOTING
4.12 ANTI TWO-BLOCKING DEVICE
5 PARTS
5.1 PARTS INFORMATION
5.2 BASE ASM (41707659)
5.3 MAST ASM (41707660)
5.4 LOWER BOOM ASM (41707661)
5.5 LOWER BOOM CYLINDER (3C324870)
5.6 LOCKING/HOLDING VALVE (73054900)
5.7 HOLDING VALVE (73054004)
5.8 EXTENSION BOOM ASM (41707662)
5.9 EXTENSION BOOM CYLINDER (3B309820)
5.10 5016-20′ EXTENSION BOOM ASM (41707663)
5.11 5016-20′ EXTENSION BOOM W/FLIP SHEAVE ASM (41709440)
5.12 WINCH/CABLE/HOOK KIT (41709522)
5.13 WINCH/CABLE/HOOK KIT w/flip sheave (31709523)
5.14 WINCH (70570198) (EFF. 11-2006)
5.15 WINCH (71057997) (THRU 11-2006)
5.16 HYD KIT-PROP’L RMT CTRL (91709528)
5.17 VALVEBANK ASM-4 SECT PROP’L RMT CTRL (51713277)
5.18 VALVEBANK (73733057-1)
5.19 VALVEBANK-WIRING DIAGRAM (73733057-2)
5.20 ELECTRICAL SCHEMATIC-PROP’L RMT CTRL (99900855)
5.21 PROP’L RMT HANDLE ASM (51713182)
5.22 INSTALLATION KIT (93707664)
5.23 DECAL KIT (95707753)
5.24 OPTION-CONVERSION KIT-5016 TO 5016-20′ (95709041)
5.25 OPTION-RESERVOIR (51709256)
5.26 OPTION-RESERVOIR (51707798)
5.27 OPTION-BOOM SUPPORT/RESERVOIR 20 GAL (51706910)
5.28 OPTION-BOOM SUPPORT (51708161)
5.29 OPTION-AUX OUTRIGGERS-PO/PD-7×5 (31712739)
5.30 OPTION-OUTRIGGER KIT-PO/PD-7×5 (31712731)
5.31 OPTION-AUX OUTRIGGERS-MO/PD-7×5 (31712740)
5.32 OPTION-OUTRIGGER KIT-MO/PD-7×5 (31712732)
5.33 OPTION-AUX OUTRIGGERS-MO/CRANK DN-7×5 (31712741)
5.34 OPTION-OUTRIGGER KIT-MO/CRANK DN-7×5 (31712733)
5.35 OPTION-OUTRIGGER KIT-ELEC PO/MD-7×5 (31712886)
5.36 OPTION-AUX OUTRIGGERS-MO/MD-7×5 (31712902)
5.37 CYLINDER-PWR DN (3B288970)
5.38 CYLINDER-PWR OUT (3B142860)
5.39 VALVEBANK ASM-2 SECT (51705983)
5.40 VALVEBANK ASM-3 SECT (51705984)
5.41 CORD REEL ASM (51713168)
5.42 CABLE ASM 14GA 2WIRE X 30″ (51713167)
5.43 CABLE ASM 14GA 6WIRE X 35′ (51713199)
5.44 ELECTRICAL WIRE ROUTING-PROP’L VALVE (90713193)
5.45 CONTROL KIT-RADIO REMOTE (90713710-1)
5.46 CONTROL KIT-RADIO REMOTE (90713710-2)
5.47 CABLE ASM 18GA/3WIRE X 4 (51713701)
5.48 CONTROL KIT-RADIO REMOTE (90713710-3)
5.49 CONTROL KIT-RADIO REMOTE (90713710-4)
6 GENERAL REFERENCE
6.1 INSPECTION CHECKLIST
6.2 WIRE ROPE INSPECTION
6.3 HOOK INSPECTION
6.4 HOLDING VALVE INSPECTION
6.5 ANTI-TWO BLOCKING DEVICE INSPECTION
6.6 TORQUE DATA CHART-DOMESTIC
6.7 TORQUE DATA CHART-METRIC
6.8 TURNTABLE BEARING FASTENER TIGHTENING SEQUENCE
6.9 TURNTABLE BEARING INSPECTION FOR REPLACEMENT
6.10 LIMITED WARRANTY